Researchers Make the First Flexible Memory Device Using Oxide Ferroelectric Material
April 14, 2017 | NC State UniversityEstimated reading time: 2 minutes
For the first time, researchers have been able to deposit an ultra-thin oxide ferroelectric film onto a flexible polymer substrate. The research team used the flexible ferroelectric thin films to make non-volatile memory devices that are wearable and resilient.
“Ferroelectric materials are capable of storing charge, which makes them ideal for non-volatile memory devices,” says Jacob Jones, a professor of materials science and engineering at North Carolina State University and co-author of a paper on the work. “But ferroelectric materials tend to be brittle, and normally have to be made at high temperatures – which would destroy most polymers. We’ve now found a way to make an extremely thin film of ferroelectric material that can be made at low temperatures.”
“What is most exciting about this work is the ability to make ferroelectric thin films at low temperatures and integrate them with carbon-based organic semiconductors to make highly flexible memory devices,” says Franky So, the corresponding author of the paper and Walter and Ida Freeman Distinguished Professor of Materials Science and Engineering at NC State.
“The key to success of this work is the special technique we developed to make these ferroelectric thin films at low temperature and maintain the flexibility,” says Hyeonggeun Yu, a postdoctoral researcher at NC State and lead author of the paper. “We have created a new device platform which can integrate these memory devices with other flexible electronic circuits.”
“This advance allowed us to create a pliable ferroelectric that can be used to create stable memory storage units for use in energy-efficient electronic applications for use in everything from space exploration to defense applications,” says Ching-Chang Chung, a postdoctoral researcher at NC State and co-author of the paper.
The researchers worked with hafnium oxide, or hafnia, a material that has ferroelectric properties when applied as a thin film. And, for the first time, the researchers were able to show that the flexible hafnia thin films exhibited ferroelectric properties with thicknesses ranging from 20 nanometers (nm) to 50 nm.
“This is a milestone in nanotechnology,” So says.
“We made a low-voltage, non-volatile, vertical organic transistor using a hafnia thin film,” Jones says. “That level of detail may only be exciting for those in the electrical engineering field. For everyone else, that means this is a practical discovery with very real applications.”
“We’ve found that the prototype is fully functional and retains its functionality even when bent up to 1,000 times,” Chung says. “And we’re already working on what can be done to improve reliability when the material is bent more than 1,000 times.”
The paper, “Flexible Inorganic Ferroelectric Thin Films for Non-Volatile Memory Devices,” is published in the journal Advanced Functional Materials. Paper co-authors include Nate Shewmon, a postdoctoral researcher at NC State; Szuheng Ho, Joshua Carpenter and Tianlei Sun, Ph.D. students at NC State; Ryan Larrabee, an undergraduate student at NC State; Harald Ade, Distinguished Professor of Physics at NC State; and Brendan O’Connor, an assistant professor of mechanical and aerospace engineering at NC State.
The work was done with support from Nanoholdings LLC; the National Science Foundation, under grant number ECCS-1542015; the U.S. Army Research Office, under grant number W911NF-15-1-0593; and a Research Opportunity Grant from the University of North Carolina General Administration.
Suggested Items
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Boeing, GKN Aerospace Close Deal for St. Louis Site
04/29/2024 | BoeingBoeing has closed a deal with GKN Aerospace St. Louis and its parent company, Melrose Industries, to continue the manufacturing of critical components that support the U.S. government and its allies.
Cicor Records Solid Growth in Q1
04/16/2024 | CicorThe Cicor Group continued to grow in the first three months of the year. Quarterly sales increased by 11.8% to CHF 107.3 million compared to the first quarter of the previous year (Q1/2023: CHF 96.0 million).
TT Electronics Awarded Contract with Kongsberg Defence and Aerospace
04/11/2024 | TT ElectronicsTT Electronics, a leading provider of global manufacturing solutions and engineered technologies, announced today that its Fairford UK business has been awarded a new contract with long-standing customer Kongsberg Defence and Aerospace (Kongsberg) for the production of complex cable harness solutions.
Cicor Successfully Completes Acquisition of TT Electronics IoT Solutions Ltd.
04/03/2024 | CicorThe Cicor Group has successfully completed the acquisition of TT Electronics IoT Solutions Ltd. with three production sites in the UK and China.