New Ultrasonic Coating System Advances Spray-On EMI Shielding Capabilities
January 14, 2020 | Sono-TekEstimated reading time: 1 minute
Sono-Tek Corporation (OTC BB: SOTK) announces the release of a new ultrasonic coating system, the FlexiCoat EMI, specifically designed for conformal spraying of EMI (Electromagnetic Interference) shielding material onto semiconductor packages. This new market is seeing growing interest and activity as a result of smaller devices requiring improved EMI shielding protection properties. Conventional techniques such as shield cans and SMT clips are inadequate for newer small devices. Ultrasonic coating is a cost-effective, faster and simpler alternative to expensive sputtering-based coating equipment.
Sono-Tek’s FlexiCoat EMI is an automated XYZ coating system specifically engineered and proven to spray copper and silver-filled shielding materials with precise control of coating characteristics and little overspray.
Sono-Tek ultrasonic nozzles are widely known for their low/no maintenance, non-clogging, high uniformity and highly repeatable performance. A special ultrasonic nozzle configuration was developed for these EMI applications to provide a more targeted spray area that reduces overspray drastically when compared with all other spray types. This new nozzle design is fully integrated into the FlexiCoat EMI system, along with an array of application-driven features to make the system a full coating solution for EMI shielding coatings.
Some features of the FlexiCoat EMI system include:
- 500x500 mm slides, conveyor and pumping system
- Proprietary ink mixing system to ensure ink stability over time
- UPH/throughput is significantly faster than sputtering at 1/10 the price
- Compatible with ink formulations from Tatsuta and other ink providers
- Uniform shielding coverage on top and sides of package is achieved using nozzle tilt
- Top surface: sidewall thickness ratio of 1: 0.6 ~ 0.7
Bennett Bruntil, Sono-Tek’s Vice President of Sales & Marketing, said: “Our entry into this growing semiconductor application was a natural outgrowth of our semiconductor coating expertise in other applications. Our equipment is quickly proving to be an excellent fit for companies looking for an effective, low-cost alternative to sputtering for deposition of new copper and silver-filled epoxy materials on the market.
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.