AT&S’ Growth Continues Unabated in Q1 21/22
September 29, 2021 | AT&SEstimated reading time: 2 minutes
AT&S recorded a very positive revenue development despite unfavourable negative currency effects in the first quarter of 2021/22.
“Digitalisation continues to drive the demand for our technologies. Markets that showed temporary weakness are increasingly recovering. Strategically, we are still fully on track. The production of IC substrates in particular is running at full speed. The implementation of the capacity expansion in Chongqing is making excellent progress. The first parts of the production equipment have already been qualified as well as be put into operation,” says CEO Andreas Gerstenmayer.
Consolidated revenue rose by 28% to € 317.7 million in the first quarter of 2021/22 (PY: € 247.9 million). Adjusted for currency effects, the increase in consolidated revenue even amounted to 37%. The additional capacity and growing demand for ABF substrates made a significant contribution to revenue growth. The development was supported by the broader application portfolio for mobile devices and the demand for printed circuit boards for modules. In the AIM segment, all three areas contributed to revenue growth. Although the Automotive segment nearly doubled its revenue after a very weak first quarter of the previous year, the shortage of semiconductors will continue.
EBITDA increased from € 39.5 million to € 46.3 million. The improvement in earnings is predominantly attributable to the increase in consolidated revenue. Currency fluctuations of the US dollar and the Chinese renminbi had a negative impact of € 18.1 million on the earnings development. In addition, temporary start-up costs for the IC substrate production in Chongqing were incurred. On the market side, a change in product mix in the Mobile Devices segment had a negative effect on profitability.
AT&S continues its efforts to make the company future-proof by intensifying investments in the organisation as well as in research and development. Investments of € 31.3 million were made during the reporting period (previous year: € 22.4 million) to prepare for future technologies and pursue the modularisation strategy, among other things. Adjusted for the start-up effects of the Chongqing project, EBITDA amounted to € 50.8 million.
The EBITDA margin amounted to 14.6% (adjusted EBITDA margin: 16.0%), falling short of the prior-year level of 15.9% (adjusted EBITDA margin: 16.5%). EBIT declined from € 0.2 million to € -0.4 million. The EBIT margin amounted to -0.1% (PY: 0.1%). Finance cost – net improved from € -5.9 million to € -3.1 million, which is primarily attributable to the positive change in exchange rate differences. Loss for the period improved by € 2.6 million from € -7.9 million to € -5.3 million, primarily due to the improvement in finance cost – net.
The financial position was characterised by an increase in non-current assets at the end of the reporting period. Total assets rose to € 2,515.7 million, up 5.3% on 31 March 2021 as a result of additions to assets and technology upgrades.
Equity declined by -0.4% compared with 31 March 2021 and amounted to € 798.6 million, which was primarily earnings-related. The equity ratio decreased by 1.8 percentage points to 31.7% and temporarily fell below the medium-term target of 40.0%. This is attributable in particular to the increase in total assets as a result of investments and securing the financing of the future investment programme.
Cash and cash equivalents rose to € 560.7 million (31 March 2021: € 552.9 million). In addition, AT&S has financial assets of € 16.2 million and unused credit lines of € 328.5 million to secure the financing of the future investment programme and short-term repayments.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.