GUC Delivers its First TSMC N3 Chip, AI-Optimized N5 Design Using Cadence Digital Solutions
January 20, 2023 | Cadence Design Systems, Inc.Estimated reading time: 1 minute
Cadence Design Systems, Inc. announced that Global Unichip Corp. (GUC) successfully delivered an advanced HPC design and a CPU design using Cadence® digital solutions. The HPC design was created using the Cadence Innovus™ Implementation System on TSMC’s advanced N3 process and featured a 3.5 million instance count that reached clock speeds of up to 3.16GHz. The CPU design was created using the AI-enabled Cadence Cerebrus™ Intelligent Chip Explorer and the digital full flow on the TSMC N5 process technology, delivering 8% reduced power and a 9% area improvement while significantly improving engineering productivity.
The Innovus Implementation System’s highly accurate GigaPlace engine provided GUC with support for TSMC FinFlex™ cell row placement and consideration for pin access throughout the flow for N3 design rule checking (DRC) closure. The state-of-the-art GigaOpt engine delivered improved optimization by enabling the most optimal configuration from the TSMC N3 library while balancing different cell row utilization. The Innovus Implementation System also includes a massively parallel architecture and incorporates the well-established NanoRoute engine, which enabled GUC to address signal integrity early in the design flow while improving post-route correlation.
Cadence Cerebrus, coupled with the Cadence digital flow, was instrumental in providing GUC with power, performance and area (PPA) benefits as well as the ability to perform synthesis through implementation and signoff on their 5nm CPU design, optimizing engineering team productivity. Unique to Cadence Cerebrus is its reinforcement learning engine that autonomously optimized GUC’s design flow, allowing the team to exceed human engineering potential and accelerate time to market.
“GUC is a market leader providing advanced chip solutions for AI, HPC, 5G, industrial and other emerging applications,” said Dr. Louis Lin, senior vice president of Design Services at GUC. “Given our commitment to deliver the most competitive designs to our customers, it is important for us to invest in leading-edge technologies. The Cadence Cerebrus Intelligent Chip Explorer, in conjunction with the broader digital flow, was the natural choice to help us achieve faster design turnaround via AI technology while also improving PPA. The Innovus Implementation System was instrumental in helping us deliver our first N3 chip, enabling our team to accelerate the creation of our high-performance, low-power HPC design.”
Suggested Items
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.