DuPont Launches ULTRAFILL 6001 Dual Damascene Copper Plating Bath for BEOL Metallization in Semiconductor Fabrication
March 30, 2023 | DuPontEstimated reading time: 1 minute
DuPont Electronics & Industrial announced its new ULTRAFILL™ 6001 dual damascene copper offering for semiconductor fabrication. This latest addition to the family of DuPont™ ULTRAFILL™ and NANOPLATE™ series of dual damascene copper plating baths is specially designed to enable back end of line (BEOL) electroplating process for copper interconnects in the range of tens to hundreds of nanometers and is suitable for lower, middle and upper metal layers.
BEOL is the second major stage of the semiconductor fabrication process where tiny wiring schemes are formed as interconnects within the device. As the semiconductor industry continues to shrink technology nodes, dual damascene products that deliver strong gap-fill performance to meet key process and reliability requirements become even more critical to enabling the scaling roadmap for interconnects.
The DuPont™ ULTRAFILL™ line of dual damascene copper products is known for producing copper film deposits with high purity and low stress to deliver consistent, reproducible void-free filling. The latest dual damascene copper plating bath, ULTRAFILL™ 6001, is formulated with a new organic additive platform that demonstrates improved gap-fill capability, enhanced wettability, and a higher degree of leveling and mounding control, to enable the copper plating process for even finer feature sizes in the circuitry.
"For more than 10 years, leading-edge semiconductor manufacturers have relied upon DuPont’s dual damascene products for achieving semiconductor technology nodes below 20 nm,” said Shashi Gupta, global marketing director, Advanced Packaging Technologies, DuPont Electronics & Industrial. “With proven performance in high-volume manufacturing, our products can achieve void-free bottom-up fill with minimum overburden, and we will continue to look for ways to innovate as we enable back end of line advanced metallization processes and support the trend towards miniaturization.”
Interested customers should contact their DuPont Electronics & Industrial account managers to learn more about ULTRAFILL™ 6001 and other materials in the ULTRAFILL™ and NANOPLATE™ family.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.