Toyochem Develops Highly Flexible EMI Shielding Films for Smart Devices
June 9, 2023 | ToyochemEstimated reading time: 1 minute
Toyochem Co., Ltd., the polymer and coatings division of Japan’s Toyo Ink Group, has rolled out the new LIOTELAN line of highly flexible conductive and insulating sheet films for the protection of electrical and electronic equipment. The new sheet films exhibit high water-resistance and are highly flexible with a high elongation of 500 percent. LIOTELAN shielding films can be hot-press molded on to the electromagnetic interference (EMI) noise source on the printed circuit board (PCB), thus forming a lightweight multi-layer shield with a more compact format than a metal shielding can. The gives component engineers increased design freedom to create electronic devices of lower profiles and lighter weights – and without compromising shielding effectiveness. Potential applications are wearable devices, wireless communications and other smart devices.
Traditionally, metals are commonly adapted as EMI shields due to their shielding effectiveness. Looking to replace shielding metals, Toyochem engineers in Japan applied its own functional filler dispersion technology in the development of highly conductive fillers to improve EMI shielding performance. This development, and the application of Toyochem’s polymer sheet conversion technology, led to the creation of filler films that could be converted into flexible LIOTELAN sheet films with high shielding effect, water-resistance and mechanical durability.
Moreover, LIOTELAN sheets films are capable of fabricating multi-layer EMI shields by the hot-pressing method. “An insulating sheet layer can be hot-press molded directly over electronic components attached to the substrate. A conductive layer is formed over the insulating layer using the same method. With LIOTELAN shielding films, device engineers can easily and speedily create lightweight, durable and effective EMI shields, without the need for soldering or a bulky can cover,” explains Hidenobu Kobayashi, technical manager at Toyochem. “This new innovative product enables the formation of ultra-thin shielding laminates of high flexibility, conductivity and insulation properties required by next-generation PCBs. In line with rising demand for components of lighter weight, lower profiles, and more durable and flexible materials, we expect to see the trend towards metals being replaced by polymer composites to continue.”
The new LIOTELAN line of EMI shielding sheet films will be making its global debut at the Toyochem booth #1016 at the International Microwave Symposium in San Diego, California, from June 11–16, 2023. Toyochem will also feature its LIOELM™ TSS™ 500 series for next-generation high-speed communication devices among other high-performance materials designed to solve problems related to electromagnetic radiation and thermal conductivity.
Suggested Items
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Nordson Electronics Solutions Expands the SELECT Synchro Selective Soldering Equipment Family With New Synchro 3 Release
04/03/2024 | BUSINESS WIRENordson Electronics Solutions, a global leader in reliable electronics manufacturing technologies, releases the Synchro™ 3, a new model in the SELECT® Synchro™ selective soldering equipment family for high-volume printed circuit board assembly applications.
Revolutionizing Precision Soldering: Introducing the iBot-i1/2s by Sasinno Americas
04/02/2024 | Sasinno AmericasSasinno Americas is pleased to introduce its latest advancement in soldering technology – the iBot-i1/2s. This cutting-edge system redefines precision soldering with groundbreaking features designed to elevate efficiency and performance in electronics manufacturing processes.