AT&S Wins the Airbus Avionics Supplier Award for 'Best Improvement Project'
June 16, 2023 | AT&SEstimated reading time: 2 minutes
AT&S’s long-standing customer, Airbus Avionics, chose AT&S’s copper recycling project “AERIS” as best improvement project at the 1st Airbus Avionics Supplier Day in Toulouse. AT&S process engineer, Florian Trinkl, was on stage to receive the prize stating: “This award from an important partner shows that our commitment to sustainability is valued. It was nice to receive this recognition in the name of the entire AERIS team.”
More copper, less pollution
With the implementation of an innovative and homegrown wastewater treatment process, AT&S demonstrates a new solution for sustainable resource management and recycling practices in the electronics industry: AERIS is a copper recycling system developed by AT&S to recover pure copper and chemicals from waste. The benefits are obvious: smaller demand for chemicals and copper, less waste, less CO? emission and more efficient reuse of resources.
The AERIS project was launched back in 2019 and was recently installed at AT&S’s headquarters in Leoben Hinterberg, Austria. Its infrastructure will soon enable the recovery of up to 1000 kg of pure copper per day, as well as the reuse of a significant amount of chemicals extracted from wastewater.
This comprehensive circular production makes it possible for AT&S to drastically reduce the acquisition of copper, hydrochloric acid and chemicals for wastewater treatment, whilst limiting and preventing the build-up of several tons of industrial sludge per year. AERIS reduces AT&S’s carbon footprint by 29% compared to a standard primary use of copper by minimizing the need for the expensive production and transport of valuable resources.
Through this unique and sustainable innovation, AT&S was able to register eight new patents in relation to AERIS, six of which have already been granted.
Sustainability strategy
“The implementation of AERIS is an important milestone for our sustainability strategy. We demonstrate that we are not only a technology leader in electronics but also in sustainable manufacturing. Our innovative products help to shape the future of energy, traffic and communication systems”, says AT&S CTO Peter Griehsnig.
Once the fine-tuning of the AERIS system in Hinterberg is completed, AT&S will start evaluating the roll out of similar systems for its other production plants around the world. AERIS is an important part of a broader sustainability strategy, through which AT&S has committed itself to several concrete goals that will reduce the company’s carbon footprint and deliver a path to sustainable growth.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?