-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Book Excerpt: 'The Printed Circuit Designer’s Guide to... Designing for Reality,' Chapter 4
January 25, 2024 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
This is an excerpt from Sunstone Circuit's book: The Printed Circuit Designer's Guide to... Designing for Reality by Matt Stevenson
Chapter 4: What CAM Can and Cannot Do
With an understanding of the overall manufacturing process, we can dive into the most important design-for-reality areas. Most front-end CAM tooling departments can do a great deal to help turn a marginal design into a manufacturable product, but even these superheroes have limitations to their powers. Some of the most common edits that a CAM tooler makes will not be visible to most people but can drastically improve the yield and reliability of the product in manufacturing and beyond.
Why Did CAM Change My Design?
If CAM changed your design, it was probably related to solder mask. CAM departments spend a great deal of time making edits to the solder mask layers. Conceptually, the solder mask layers seem like one of the simplest outputs for a design, but that is not always the case in reality. Simple, right? Flood the entire board and add clearances for all of the solderable features, like SMT pads, through-hole pads, and test points. Ensure the openings are wide enough to provide enough pad for an effective solder. Minimize the size to optimize the dam between pads in tight pitch areas, and not expose adjacent copper features with the solder mask clearance. (This could cause solder bridge shorts.)
Sure sounds simple. In reality, solder mask clearances often come defined in the electronic footprint of each component and, depending on the source of the electronic footprints, create the condition where there are different rules for every component, some good and some, well, not so good. Designs can often come into CAM with no openings in the solder mask file for a given component, which can create its own set of challenges if not identified prior to manufacturing. It is, after all, difficult to solder parts onto a pad covered in solder mask (Figure 4.1).
An effective approach would be to use a standard solder mask swell to all of the parts. A good practice is to use a global setting in the CAD tool while designing and/or saving components to your parts library in order to account for the swell. Depending on the CAD tool, one approach might be more appropriate than the other. CAM toolers with a thorough understanding of the manufacturing process and its variations will make logical edits to the original file. These alterations allow for process variations while maintaining the functionality of the parts. They also prevent unwanted violations of the manufacturing specifications, such as IPC-A-600.
Another approach, recommended by IPC design classes, is to provide zero swell (net land or pad size). This allows each supplier to clear the solder resist to the minimum of their process capability, keeping the design rules consistent, and allowing the flexibility to vary clearance (which they already must do anyway.) CAM toolers might suggest other design modifications before sending the order into manufacturing.
To continue reading this chapter, download this title here.
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.