-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 1 minute
Effects of DC Bias on Ceramic Capacitors
The density of multilayer ceramic capacitors (MLCC) has increased tremendously over the years. While 15 years ago a state-of-the-art X5R 10V 0402 (EIA) size capacitor might have had a maximum capacitance of 0.1 uF, today the same size capacitor may be available with 10 uF capacitance. This huge increase in density unfortunately comes with a very ugly downside: the capacitance is now very sensitive to DC and AC bias across the part.
MLCCs are manufactured with different types of ceramics. With a given case size, dielectric thickness and plate count, the capacitance is proportional to the dielectric constant of the ceramic: the higher the dielectric constant, the more capacitance we get from the same structure. For low-loss, high-performance RF and microwave applications, Class 1 materials are used. These provide very good and stable electrical characteristics, practically zero bias and temperature dependence, but their relative dielectric constant is below 100 and hence capacitance density is low. In a 0402-size package we may get 1000 pF with 50V rating. If we need more capacitance in a small package, we have to select Class 2 (or Class 3) ceramics, which are ferroelectric materials with a dielectric constant in the 200 to 14000 range.
A typical two-terminal MLCC internal geometry is shown in Figure 1. The two vertical metal terminals connect every other horizontal plate, creating a number of parallel-connected parallel-plate capacitor segments. The stack of capacitor plates fills the H total capacitor body height with an effective height of He. The non-connected capacitor plates should not come out to the sidewall of the capacitor body, they are pulled back to create a small G gap.
To read the rest of this column from the February 2015 issue of The PCB Design Magazine, click here.
More Columns from Quiet Power
Quiet Power: The Effect on SI and PI Board PerformanceQuiet Power: 3D Effects in Power Distribution Networks
Quiet Power: Noise Mitigation in Power Planes
Quiet Power: Uncompensated DC Drop in Power Distribution Networks
Quiet Power: Ask the Experts—PDN Filters
Quiet Power: Friends and Enemies in Power Distribution
Quiet Power: Be Aware of Default Values in Circuit Simulators
Quiet Power: Do You Really Need That Ferrite Bead in the PDN?