IPC Standards Committee Reports, Part 2 – Assembly and Joining, Component Traceability, Flexible Circuits, High Speed/High Frequency
June 6, 2016 | IPCEstimated reading time: 5 minutes
The 2-19a Critical Components Traceability Task Group worked through comments submitted to the working draft of IPC-1782, Standard for Traceability of Critical Items Based on Risk. Once the comments have been resolved, the task group will distribute IPC-1782 for Final Draft for Industry Review in early summer, with a goal to ballot the document for publication in late summer. This standard will establish minimum requirements for traceability of PCB assembly parts and processes throughout the entire supply chain, with particular initial emphasis on component traceability.
Flexible Circuits
The D-11 Flexible Circuits Design Subcommittee met to resolve comments to the Final Draft for Industry Review of IPC-2223D, Sectional Design Standard for Flexible Printed Boards. Comments addressed flexible cross-sectional construction examples and factors that affect impedance and capacitance control for flex and rigid-flex printed board applications. The document will be balloted for a targeted Q3 2016 release.
The D-12 Flexible Circuits Performance Subcommittee met to advance the Working Draft to IPC-6013D, Qualification and Performance Specification for Flexible Printed Boards. The group addressed issues involving bends, folds, wrinkles and creases in cover film materials and also reviewed criteria for plated microvia structures.
High Speed/High Frequency
The D-22 High Speed/High Frequency Performance Subcommittee met to resolve negative votes to IPC-6018C, Qualification and Performance Specification for High Frequency (Microwave) Printed Boards. The group also began the review of comments to the Final Draft for Industry review of the corresponding IPC-6018CS Space and Military Avionics Applications Addendum. Both documents are targeted for a Q3 2016 release.
The D-24a TDR Test Methods Task Group met to review data from the Gage R&R Validation Program for the forthcoming “B” Revision to IPC-TM-650, Method 2.5.5.7, Characteristic Impedance of Lines on Printed Boards by TDR, ahead of its submission to the IPC 7-11 Test Methods Subcommittee for approval and release.
The D-24b Bereskin Test Methods Task Group met to prepare the official project request (IPC TAEC PIN) addressing the Bereskin stripline resonator test method that lends itself to the test and measurement of Dk and Df of thin dielectric materials up to 20 GHz. A 1st Working Draft of the new method will be provided for review and comment in May 2016.
The D-24c High Frequency Test Methods Task Group meet to review data from five participating companies in a round robin test program that will assess the state-of-the-art of test material provides and testing labs in the measurement of dielectric properties of materials at frequencies above 10 GHz. A variety of test methods are being utilized based on current practices utilized in commerce.
Page 2 of 2Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.