U.S. Circuit Goes Green with Solar and LED Installation


Reading time ( words)

U.S. Circuit has just completed a $1 million installation of a 251 kWh solar system covering their entire parking lot.

This system makes U.S. Circuit one of a kind within the U.S. PCB fabrication industry. With this massive green effort, U.S. Circuit looks to save the company about 20% on their electric bill, with the side benefit of providing shaded covered parking for their employees. 

To further their green effort, U.S. Circuit has also converted all of their internal and external lighting systems to 480 LED fixtures.

U.S. Circuit President Mike Fariba stated, “With all the impact to the environment and our fuel sources these days, we felt the need to do our part to reduce our own footprint. Going green has taken time and presented some challenges up front but we’re confident that our efforts will provide great benefit for both the environment and U.S. Circuit for years to come.”

About U.S. Circuit

For 30 years, U.S. Circuit has been a premier supplier of commercial PCBs and for the past several years a supplier for the military and aerospace market. U.S. Circuit has experienced continued growth in a challenging economy through consistently high performance, on-time delivery, superior quality and an emphasis on the highest level of customer service. U.S. Circuit is proud to be the circuit board manufacturer for more than 250 growing companies.

Share

Print


Suggested Items

Future of 'Substances and Materials in Products' Data Exchange Formats as Standards

10/16/2019 | Jean-Pierre Theret, Dassault Systèmes
This article provides a simplified, state-of-the-art description of the data exchange formats for standards covering substances and materials reporting in products and processes. It also reviews existing issues and new challenges shared with end users of the standards and companies represented by their trade associations with some solution proposals they could discuss.

Communication, Part 1: How to Qualify a Board Shop

10/04/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 1 of this six-part series for "Fab Fridays," Mark Thompson, CID+, engineering support at Prototron, and CA Design CTO Bob Chandler discuss ways that PCB fabricators and designers can better communicate, starting with how to qualify a board shop.

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.



Copyright © 2019 I-Connect007. All rights reserved.