Advanced Copper Foil Secures a Non-Provisional Patent for New Product: Poly-Supported Copper Foil


Reading time ( words)

Advanced Copper Foil has secured an international patent for Poly-Supported Copper Foil, promoted under the name ACF-Screen. This patent is non-Provisional under International Application number PCT/050938.

ACF-Screen is comprised of a proprietary protective Poly Release film, which is adhered to sheets of ultra-thin copper foil in a cleanroom environment. This product provides complete protection of the copper surface throughout the entire cycle of PCB layup and lamination. ACF-Screen utilizes an inert adhesive which results in a guaranteed residue-free copper surface during subsequent processing. The release film will withstand temperatures of the lamination cycle, allowing for easy removal during break-down. ACF-Screen will eliminate anomalies caused by bending or creasing of copper foils during handling, while always completely protecting the surface from foreign materials and contamination. This product is available on copper foils from 5 µm, 9 µm to 70 µm.  ACF-Screen is available on Standard, VLP, HVLP and ANP (Almost No Profile) copper foils.

“This product is going to revolutionize the industry. It will ease the handling of copper foils compared to loose foils, resulting in more efficient and speedier layup process,” says Shane Stewart, Product Manager.

ACF will be showcasing this product at the IPC APEX show in San Diego on February 14-16. Drop by the booth (#3701) for more information and to request samples of this new revolutionary product.

About Advanced Copper Foil

Advanced Copper Foil is a company dedicated to High Performance Copper Foils and their applications in the Printed Circuit and Battery Shielding Industries. Advanced Copper Foil is committed to providing PCB Fabricators, Laminate Manufacturers and Battery Shielding Companies with a cost-effective alternative to the traditional products on the market today. For further information visit: www.advancedcopperfoil.com

Share

Print


Suggested Items

Communication, Part 4: The Top 5 Causes of Engineering Delays

10/25/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 4 of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits address the top five causes of engineer delays.

Why Designers Need to Be at the SMTA Additive Electronics Conference

10/18/2019 | I-Connect007
In a recent interview, Kelly Dack and Tara Dunn (Omni PCB president and conference co-chair) discussed why designers need to attend the SMTA Additive Electronics Conference. Tara will also be attending and moderating a panel discussion at the conference.

Additive Electronics Conference Set for October 2019 Debut

10/15/2019 | Kelly Dack
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it's an important event for people to attend—especially those involved in the design process.



Copyright © 2019 I-Connect007. All rights reserved.