-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Altium Focuses on the Designer First
May 22, 2017 | Judy Warner, AltiumEstimated reading time: 1 minute
A few months before I joined Altium, while I was still with I-Connect007, I sat down with Lawrence Romine to discuss the company’s drive to satisfy the individual PCB designer, and not necessarily the OEMs who employ them. Romine also explains what sets designers and engineers apart from the average person, and why some Altium users have a different primary EDA tool, but use Altium when they need a design done fast.
Judy Warner: Lawrence, before we get started, why don't you tell us a little bit about your background.
Lawrence Romine: My background is about 16 years in professional business. My father was an engineer. Grew up working in the garage with my father starting at an early age. We restored British sports cars—MG, Triumph, Jaguar, and motorcycles. It's still what I do for fun.
I have a lifelong passion with aviation. Joined the Navy out of high school and got into avionics and was here at Miramar in the F-14 business, which was very exciting. I finished school and became a design engineer in the audio industry. This was for the audiophile business, which is really much more art than science. I did that for just a handful of years, but then got into the semiconductor business.
I got a job in the semiconductor business and I was selling mostly Xilinx components with a now-purchased distributor called Insight. I did that for four or five years and then moved over to software. I did that for the same reason you made some adjustments in your career. It really became difficult to track business into China and I was looking for an opportunity to get into something that offered a little more instant gratification.
When I engage with a customer at a block diagram level, we’re going to talk about their system and just roughly what technologies they are going to have on this design. Back then they would give you a completion date, a time-to-market date, and it was typically 18 months to two years, and I always added at least six to nine months in my forecasting. I'm sure you have had a similar experience.
To read this entire article, which appeared in the April 2017 issue of The PCB Design Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.