Patty's Perspective: From Start to Finish


Reading time ( words)

I could also say, "From Beginning to End," though that is not quite the same meaning. Our topic this month is "From Design Through Final Product" as it pertains to flexible and rigid-flex circuits. Because designing a circuit to fit in the envisioned space and perform as intended can be far from simple or obvious—but you already know that. In fact, not being a designer, I can’t imagine designing a simple circuit, let alone one that must bend or fold into a shape and space that may be just an idea in an inventor’s mind.

But of course, it is done every day by many of our readers. Is it easy for you? Our goal in this issue is to provide insights into how best to accomplish the seemingly daunting task—and with a new and different design each time. A lot of it boils down to one factor: work with your supplier and customer. You are a team, and you need to think and work together as a team with one goal: an elegantly designed product produced in a reasonable time at a reasonable cost (or at least a reasonable future cost).

Interested in some good advice? Read on!

Share

Print


Suggested Items

Decreasing Bend Radius and Improving Reliability—Part I

10/11/2019 | Kelsey Smith, All Flex
Many of the issues that arise when using a flex circuit come from a lack of knowledge about how to properly design one, especially when the circuit is required to bend.

Communication, Part 2: Design Data Packages

10/11/2019 | Steve Williams, The Right Approach Consulting LLC
The first part of this six-part series highlighted ways that PCB fabricators and designers can better communicate, starting with how to qualify a board shop. In Part 2, Bob Chandler and Mark Thompson talk about the importance of preparing, sending, and receiving comprehensive (and ideally, perfectly complete) design data packages.

Standards: Why We Have Them and Live by Them

10/07/2019 | Alifiya Arastu, Jeff Beauchamp, Harry Kennedy, and Ruben Contreras, NCAB GROUP
Have you ever designed a board but received feedback that it couldn’t be manufactured unless changes were made? Or maybe you’ve designed a complex board and sent it to the factory only to find out that the manufacturer didn’t build the board to your expectations? PCBs are becoming more complex, factory options are growing, and expectations for product life cycles are becoming longer.



Copyright © 2019 I-Connect007. All rights reserved.