-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
The State of Plating
September 3, 2019 | Marc Ladle, Viking Test Ltd.Estimated reading time: 3 minutes
The current market for selling plating lines for panel and pattern plating circuit boards in Europe is not exactly huge. Since I have been involved in selling this type of equipment, the company I work for has probably averaged the sale of one machine per year.
Normally, this has been due to the replacement of completely worn-out equipment or reinstatement of a factory after a fire. Within the last 12 months, we have sold the first line based completely on the requirement for advancing technology. Although this sample group is not large enough to see any real trend, I have a feeling that the European PCB industry is likely to see an increasing demand for machines that can achieve results to meet the demands of the newest ideas for electronic printed circuit design.
Examples
We rarely have a blank canvas to work with. In nearly every case, we must try to fit a quart in a pint pot. Space is the enemy when it comes to integrating the best available new technology into the footprint of the previous 20-year-old plating line. To make matters worse, it is not unusual to be asked to increase the output capacity of the equipment at the same time.
Increasingly, PCB design technology utilises buried and blind via holes and plated via fill is also becoming more and more common. The buried and blind holes mean that the loading on the plating equipment is multiplied by the number of different inner layer connections. The same technology means that equipment needs to deal with thinner and thinner materials.
Plating copper via fill typically means the tank design must be larger, so it takes up more of the valuable space available and takes a long time compared to a traditional throughhole cycle. A typical through-hole plate might take 45–60 minutes where a via hole run could be 3–4 hours.
It is well known that the size of PCB factories in Europe is usually much smaller than the factories in Asia. Typically, this means there is only a single plating line available to production, and this one piece of key equipment must cover every type of work which goes through the factory. Compromises must be made, and usually, it is the work at the extremes of capability that suffer. For example, very thick heavy panels are hard to transport using commonly used top-clamping methods (they can drop out of the clamps unexpectedly). Very thin panels need extra support to stop them folding when they are dipped into the tanks and also to keep them in a stable position in the centre of the tank between the anodes (the plating will be too heavy on the side closer to the anodes and too thin on the side which is further from the anodes). For both problems, simple solutions are available, but the same fix does not suit both extremes at the same time.
The plating chemistry has also advanced when compared to the simple solutions and replenishment additives of years ago. Again, the major problem for smaller manufacturers is the sheer amount of variation in the work they have to put down the line and the fast turn arounds required by customers that prevent them from batching similar work together. The chemistry in a bath can definitely be tuned to provide even plating of a large area, such as panel plating where the whole surface of the panel is plated as well as the through-holes, but the same tuning is likely to make it very difficult to plate isolated details or very small plating areas. In the worst case, the additives have to be stripped out of the solution using a carbon filter and then added again to suit the next requirement.
Solutions and Developments
All of the previous cases are real examples I have come across during the last year, and they are very big problems for the companies involved. In some cases, the only practical solution is a larger factory and a second special-purpose plating line. Development of hardware to meet the needs of the large range of challenges facing the plating operation has recently been quite strong. There are a number of features becoming more commonplace on new equipment and some that could also be retrofitted to existing equipment.
To read the full article, which appeared in the August 2019 issue of PCB007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.