Time for Perovskites
September 18, 2019 | Institute of Physical Chemistry of the Polish Academy of SciencesEstimated reading time: 2 minutes
What should be a dream solar panel? Efficient, cheap to produce, durable, flexible and eco-friendly. All these we can get thanks to perovskites: new material offering energy conversion efficiency comparable to silicon panels but much cheaper to produce with simple technology. New research done at IPC PAS in collaboration with EPFL, Switzerland, brings us closer to commercializing this technology.
Have you ever wished for charging your phone while hiking? Or maybe just one thing prevented you from becoming a prosumer—lack of roof suitable for installing solar panels? If you wait a little, your dreams may come true thanks to perovskites. Metal halide perovskites have emerged as leading cost-effective candidates for light harvesting materials in solar panels over the last few years.
What you may see today on roofs or special photovoltaic installations are silicon cells. They are quite thick and rigid, and production requires a lot of time, very high temperature and high-end technologies. All this means: high costs.
In turn, perovskites are relatively simple and cheap to produce and their synthesis does not require complicated and expensive apparatuses. While being cheap to produce, perovskite offers energy conversion efficiency comparable to silicon photovoltaics (even though the latter has been researched for over 40 years, it still does not exceed 27%) and efficiency records are going up.
At the start, in 2009, perovskite’s efficiency was at 3.9%. “A decade later we’ve reached a momentary efficiency of 24.2%,” says Rashmi Runjhun. “It can potentially go as high as 31% and with tandem architectures the efficiency can be pushed even higher”, adds the scientist, “and isn’t the efficiency what everybody is now looking for?”
According to Runjhun that’s why perovskites have such huge industrial potential. After all, one just needs to get a few of fairly available chemical compounds, mix them together to create a solution, make a film, and then anneal it - crystallize it to make the current flow better.
The PhD student of NaMeS hopes that in the near future, thanks to her and other researchers, photosensitive layers made of perovskites will be put on various, including flexible and elastic surfaces, such as uneven, irregular walls, roofs or even clothes. Maybe we’ll even invent wall paint that will generate energy.
Research done at IChF PAN in collaboration with EPFL, Switzerland, will certainly help it. Thanks to a slight change in the components of the perovskite solution scientists managed to increase the power conversion efficiency from 15 to over 20%. The increase stems from increased grains of the active layer as well as from better separation of charge. The team also managed to increase the carrier lifetime inside the perovskite layer and also increase their stability.
These results were described in a recent paper published in Chemistry of Materials: "Engineering of Perovskite Materials Based on Formamidinium and Cesium Hybridization for High-Efficiency Solar Cells".
Remaining challenges? “Make new perovskite solar cells more ecological, as for now they are based on toxic lead element,” adds the supervisor of this project prof. Janusz Lewinski. And what’s the dream solar panel according to Rashmi Runjhun? Of course it should be efficient, but also cheap to produce, durable (with at least 10 years of good activity) and eco-friendly. And, of course, easy to put on flexible substrates. So one could for example put photosensitive layer on fabrics. This way we wouldn’t have to worry about camping unplugged.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
Stan Rak: Elevating the Ideas and Insights of IPC's Thought Leaders Program
04/25/2024 | Stanton Rak, SF Rak CompanyAs a member of the IPC Thought Leaders Program (TLP), I am responsible for identifying knowledge-sharing opportunities that can generate ideas and insights that strengthen the IPC community as well as create a sustainable and lasting future for its members. I am delighted to highlight some of my recent contributions as a member of the TLP.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.