NextFlex Awards Over $11.5 Million in Funding for Flexible Hybrid Electronics Innovations in Hypersonics, Flexible Batteries and Anti-counterfeiting
April 29, 2020 | NextFlexEstimated reading time: 2 minutes
NextFlex®, America’s Flexible Hybrid Electronics (FHE) Manufacturing Institute, today announced $11.5 million in funding (including $6.3M in cost-share contribution from participants) for 12 new projects as part of its Project Call 5.0 to further promote FHE development and adoption throughout the U.S. advanced manufacturing sector.
Project Call 5.0’s awarded projects represent a diverse and innovative set of companies and universities that together are focused on maturing the industry’s capabilities while leveraging the strong foundation established in prior Project Calls. Included in this latest round of funded projects are applications that focus on aerospace, structural health monitoring and sophisticated array antennas to help move the manufacturing industry closer to volume manufacturing and commercialization. This latest round of funding brings the total amount invested in FHE developments to over $100M, including cost share contributions from prior Project Call participants.
“Despite these uncertain times, NextFlex and its members are forging ahead to deliver flexible, conformable, low-cost, thin and lightweight electronics solutions for a number of application areas, both for defense and commercial applications alike,” said Malcolm Thompson, Executive Director at NextFlex. “With several projects focused on the manufacturability and reliability of FHE systems and devices, this current round of funded projects demonstrates an overall maturation of FHE technology – which showcases the considerable progress and investment occurring within the advanced manufacturing sector despite aspects of the economy that be might temporarily stalled.”
The 12 winning projects will address reliability and process improvements in manufacturing automation and test protocols to ensure FHE systems perform at parity or better than traditional rigid systems. Furthermore, the projects will help to transition an increasing number of new capabilities into the U.S. industrial manufacturing sector for further advancement of the industry.
Project Call 5.0’s awarded funding will go to:
- Development led by Worcester Polytechnic Institute to enhance the endurance and resolution of inkjet printing for high volume digital manufacturing
- Development led by Binghamton University to demonstrate printed stretchable conductors for optimal mechanical and electrical performance
- Development led by SysteMECH to achieve consistent automated component attach for ultra-thin FHE systems and devices
- Development led by Hewlett Packard Enterprise to develop the FHE Process Design Kit (PDK) 2.0, expanding design tools and libraries to foster commercialization
- Development led by GE Global Research to develop scalable manufacturing processes for embedded sensors in composite structures
- Development led by Lockheed Martin Company for trusted FHE with a passive UHF-RFID tag with encrypted security features for authentication and tamper resistance
- Development led by Auburn University to test and evaluate flexible batteries and provide guidelines for performance and reliability
- Development led by The Boeing Company to additively manufacture durable high temperature electronics for hypersonic vehicles
- Development led by GE Global Research that will characterize additively manufactured electronics properties, interconnects, and processes capable of 300-750 degrees for hypersonic applications
- Development led by GE Global Research to design and produce reliable, flexible and conformal temperature and humidity sensors for extreme environments, in partnership with US Army CCDC-Armaments Center
- Development led by The Boeing Company to mature the manufacturing process of embedding antennas within fiberglass composite structures and validating RF performance for conformal antennas for telemetry, in partnership with Missile Defense Agency
- Development led by Lockheed Martin Company for flexible interconnects for large deployable x-band phased arrays that integrate fiber optics to reduce size and weight
For more information about NextFlex and the Project Call program, please visit https://www.nextflex.us/project-call/.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.