A Design Economics Primer
May 21, 2020 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
When you start a new design, do you begin tracking costs right away, or do you wait until you have a functioning product before you start looking at the dollars and cents? Chris Young begins cost-aware design before the design cycle has even begun. Andy Shaughnessy and Nolan Johnson recently interviewed Chris, an engineer with The Goebel Company and founder of Young Engineering Services, and asked him to explain his approach to design economics.
Andy Shaughnessy: Tell us about your position and responsibilities, and we’ll go from there.
Chris Young: At The Goebel Company, I’m the chief hardware engineer. My primary responsibilities are product architecture, design, and development, which starts from a customer need and progresses into delivery and sustainability.
Shaughnessy: You have a pretty wide view of things.
Young: I’ve been lucky to be exposed to quite a bit of stuff. I’ve worked on product development from the cradle to the grave in the avionics industry, semiconductor and semiconductor test, and developing test systems for space and medical devices, ranging from airborne surveillance systems to electromechanical medical devices. I’ve had the pleasure of working with many different people in various industries.
Shaughnessy: We have been talking about design for profitability for a couple of years, and we started looking into the whole issue of design economics. In your position, how important is the cost of what you’re doing? Young: Along with the chief technologist, we are primarily responsible for the profitability of the company. The products that I design are directly related to revenue and profit.
Shaughnessy: You’re looking at the cost from the very beginning of the design cycle?
Young: You must. In my career, I have developed a systems view of what’s happening, which has shaped how I approach the issue of costs and profitability. It also depends on the environment that you’re in. I always ask myself basic questions, such as, “What are we trying to do? When do we need to do it? How are we going to do it? Which market are we addressing? What do we think our budget is?”
To read this entire article, which appeared in the April 2020 issue of Design007 Magazine, click here.
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.