August Issue of Design007 Magazine Available Now


Reading time ( words)

Do you hand off perfect fab notes to your fabricator? According to CAM engineers, the most likely answer is “no.” But this isn’t about designers handing off incomplete data; the problem goes much deeper than that. In fact, we can’t blame designers for a situation that they didn’t create.

In the issue of Design007 Magazine, we shine a light on the process of creating fab notes, and define what should and should not go into a design data package. Preview or download your PDF copy today on the virtual newsstand and available for delivery in your e-mailbox by subscribing here.

Share




Suggested Items

Master the Art of Communication With Manufacturers

06/30/2022 | Kyle Burk, KBJ Engineering
As mentioned in the May issue of Design007 Magazine, design is performed, at times, in a vacuum. But it doesn’t have to be that way. Whenever circumstances allow, design should be performed by communicating with all stakeholders throughout the design process, hence the emphasis on the word with in DWM. Communication can occur through personal correspondence such as email and voice conversations or through more formal design meetings—in person or through videoconferencing. No matter which means of communication you prefer, it’s important to communicate early and often with stakeholders involved in the downstream processes as you bring your project to realization.

Producing Diverse Designs in Concert With Manufacturing

06/16/2022 | Scott Miller, FreedomCAD Services
There is a new acronym bubbling up in the design world: DWM, which stands for “design with manufacturing.” Why is this different than design for manufacturing, or DFM? With DWM, the emphasis is on integration between the design team and the manufacturers during the design process. DWM is much more than that. We are tasked with producing designs that meet various technical requirements, yet are cost-effective and manufacturable. We provide this service to hundreds of customers who have varying degrees of processes, tools, and manufacturing partners. Given this diversity, we have recognized the importance of designing with manufacturing to achieve the product development goals of manufacturability and technical excellence.

Designing PCBs With Additive Traces

04/28/2022 | Tomas Chester, Chester Electronic Design
Advances in technology have been clear to see within the component packaging industry, as the ball grid array (BGA) package sizes reduce from 1.0 mm pitch to 0.8 mm, 0.4 mm, and even beyond. However, while these improvements have occurred with component packages, it has become increasingly more difficult to break out and route the dense circuitry associated with these parts. Currently, the high-density interconnect (HDI) method typically used for the breakout of such parts has been to create the smallest possible subtractive-etched traces with microvias to allow for connections and escapes on the innerlayers of your PCB.



Copyright © 2022 I-Connect007. All rights reserved.