Finding Process Improvement Opportunities in Training
February 25, 2021 | Nolan Johnson, PCB007Estimated reading time: 3 minutes
Nolan Johnson speaks with Leo Lambert of EPTAC about training the next generation out of high school and vocational schools, and how his company continues to improve processes, grow and adapt to changing requirements while fulfilling its mission to deliver technical certification training.
Nolan Johnson: Leo, what’s happening in the training space lately? Have our recent pandemic-driven restrictions changed how you deliver your product? Have your instructors found success in this environment?
Leo Lambert: They must all have the same interpretations from our end, so to speak. But to get our teachers involved in the new technologies, most of that happens in conversations with our customers. What’s going on? Well, the technology itself from assembling components on printed circuit boards and soldering those components in place is one thing, but the technology has improved relative to density of the product, such as—cellphones, for example, and all that is packed into that product. Then of course, there’s the technology of the components themselves.
We did an SMTA tour at one of the major military contractors in the area. Their boards were very low technology, but the technology of their product was based in their componentry. So, while this customer may not need new technology for board circuit design and assembly, we still try to bring them up to date, relative to the new processes being used in fabricating boards, new soldering technologies, and new metals to replace the high temp alloys with the new lower temperature ones that are starting to come out.
There are a lot of new soldering irons today that are much better than the previous ones, so we cover the use of those new tools. We’ve changed all our soldering irons, simply because it shows the students what they can do with the new equipment, and specifically since the components are getting smaller. Additionally, there’s a lot of new information that comes from the component manufacturers as to how to secure their componentry on printed circuit boards. They don’t want soldering irons at very high temperatures touching those components because they’re going to crack.
The intent is to be able to teach the new technology to the students. Initially we taught through-hole and hand-soldering techniques. We still teach those processes for through-hole technology, but since then, the component sizes have shrunk down to the size of a speck of pepper. The methodology of assembling those, and the specific paste required, has changed. We need to have conversations with the component and the material suppliers as to how to apply and use their materials. Our knowledge is developed with two conversations, one being with the clients who are in the training room and the process developments they’re doing. Secondly, it’s with the people making the material—paste and solder manufacturers like Indium, AIM and Alpha—and finding out what they’re doing, because they must be developing new products for the new technologies in process.
The other conversation is in the relationships from the cleanliness programs. There are a lot of issues going on with cleanliness. Historically these processes used solvents for cleaning printed circuit boards, and when aqueous cleaning came into vogue it created an entirely new process with new materials. The question then was, how are those materials going to be used and processed so they don’t harm the product or harm the individuals who are using them? That’s how we developed our knowledge of the new technologies that are evolving. As trainers we don’t get too involved with the electronic functionality portion of the circuits, but rather the assembly of those electronic circuits.
Johnson: What I’m hearing is that, while the basic skill set that you teach might be the same, it is also at the same time more complex because of so many factors. You have to be concerned with more things. I mean, back in the Dark Ages, it was through-hole, one kind of board, and one solder, and there was plenty of room to do that and if you didn’t learn how to solder, well, you were good enough. That’s not true anymore.
Lambert: Correct. One of the things that happened is the laminate materials changed. Today there are many microwave products being developed, and we need to know how to handle those versus the traditional FR-4 materials, and so on. We have to learn how to handle those new laminates, and then know how to teach that to the students.
To read this entire interview, which appeared in the January 2021 issue of PCB007 Magazine, click here.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.