NASA’s Europa Clipper Builds Hardware, Moves Toward Assembly
April 1, 2021 | NASA JPLEstimated reading time: 5 minutes
Jupiter’s moon Europa may have the potential to harbor life. The spacecraft will use multiple flybys of the moon to investigate the habitability of this ocean world.
Europa Clipper, NASA’s upcoming flagship mission to the outer solar system, has passed a significant milestone, completing its Critical Design Review. During the review, experts examined the detailed design of the spacecraft to ensure that it is ready to complete construction. The mission is now able to complete hardware fabrication and testing, and move toward the assembly and testing of the spacecraft and its payload of sophisticated science instruments.
With an internal global ocean twice the size of Earth’s oceans combined, Jupiter’s moon Europa carries the potential for conditions suitable for life. But the frigid temperatures and the nonstop pummeling of the surface from Jupiter’s radiation make it a tricky target to explore: Mission engineers and scientists must design a spacecraft hardy enough to withstand the radiation yet sensitive enough to gather the science needed to investigate Europa’s environment.
The Europa Clipper orbiter will swoop around Jupiter on an elliptical path, dipping close to the moon on each flyby to conduct detailed reconnaissance. The science includes gathering measurements of the internal ocean, mapping the surface composition and its geology, and hunting for plumes of water vapor that may be venting from the icy crust.
Development of the spacecraft is progressing well, based on the intense examination NASA recently completed. The Critical Design Review conducted a deep dive into the specifics of the plans for all of the science instruments – from cameras to antennas – and flight subsystems, including propulsion, power, avionics, and the flight computer.
“We showed that our project system design is strong,” said Europa Clipper Project Manager Jan Chodas of NASA’s Jet Propulsion Laboratory in Southern California. “Our plans for completing the development and integration of the individual pieces hold together, and the system as a whole will function as designed to gather the science measurements we need to explore the potential habitability of Europa.”
Hardware in the Works
Beyond detailed plans, the mission has built prototypes and engineering models to test how well the instruments and engineering subsystems will work. Then there’s the flight hardware itself. Much of it is already being built; individual engineering subsystems and instruments cleared their own design reviews over the last year and a half.
The most striking of Europa Clipper’s features, its signature elements, are taking shape. Nearly 10 feet (3 meters) in diameter, the disc-shaped high-gain antenna, which will receive commands from Earth and transmit science data back down, is in its final stage of assembly. And by far the most visible of Europa Clipper’s hardware – the massive solar arrays that will unfurl in deep space like wings – are under construction as well. The spacecraft, with its arrays fully deployed, is wider than a basketball court is long, spanning 100 feet (30.5 meters). The arrays will cover over 960 square feet (90 square meters).
They will be attached to the propulsion module being built by the Johns Hopkins Applied Physics Lab (APL) in Laurel, Maryland. The propulsion module core consists of two stacked cylinders that together stand almost 10 feet (3 meters) high and hold the propulsion tanks and 16 rocket engines that will propel Europa Clipper once it leaves Earth’s atmosphere.
“It’s a very exciting time for the team, seeing the fruits of their work that will be orbiting Jupiter in a few years,” said Europa Clipper Deputy Project Manager Jordan Evans of JPL. “Even in the face of COVID-19, the team is firing on all cylinders. Using safe-at-work protocols, they’re performing the necessary work on the hardware while the rest of the team is getting their job done at home.”
A Sophisticated Suite
As this work moves forward, project leaders continue to plan the science of the mission. The spacecraft’s science instruments will measure the depth of the ice crust, measure the depth of the internal ocean and how thick and salty it is, capture color images of surface geology in detail, and analyze potential plumes.
Scientists are especially interested in what makes up the moon’s surface. Evidence suggests that material exposed there has been mixed through the icy crust and perhaps comes from the ocean beneath. Europa Clipper will also investigate the moon’s gravity field, which will tell scientists more about both how the moon flexes as Jupiter pulls on it and how that action could potentially warm the internal ocean.
“We’re doing work that a decade from now will change how we think about the diversity of worlds in the outer solar system – and about where life might be able to exist right now, not in the distant past,” said Europa Clipper Project Scientist Robert Pappalardo of JPL.
But the more instruments a spacecraft carries, the more they interact and potentially affect each other’s operation. To that end, noted Pappalardo, “We’re currently making sure the instruments can all operate at the same time without electromagnetic interference.”
The full suite of instruments will undergo extensive testing after they arrive at JPL in 2021. Early 2022 marks the start of assembly, test, and launch operations. The countdown is on.
“Less than a year to go until all the hardware assemblies need to show up in one place,” Chodas said. “We bring all these pieces together to start building up the full flight system, then test the fully integrated spacecraft and get it ready to launch.”
The team is on track to have Europa Clipper ready for a launch in 2024.
More About the Mission
Missions such as Europa Clipper help contribute to the field of astrobiology, the interdisciplinary research on the variables and conditions of distant worlds that could harbor life as we know it. While Europa Clipper is not a life-detection mission, it will conduct detailed reconnaissance of Europa and investigate whether the icy moon, with its subsurface ocean, has the capability to support life. Understanding Europa’s habitability will help scientists better understand how life developed on Earth and the potential for finding life beyond our planet.
Managed by Caltech in Pasadena, California, JPL leads the development of the Europa Clipper mission in partnership with APL for NASA’s Science Mission Directorate in Washington. The Planetary Missions Program Office at NASA’s Marshall Space Flight Center in Huntsville, Alabama, executes program management of the Europa Clipper mission.
Suggested Items
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.
New North American Product Family Release from Smart Factory Design
03/22/2024 | Smart Factory DesignSmart Factory Design is pleased to announce a new system technology and supply chain model for providing Zero Liquid Discharge (ZLD) Wastewater Recycling Systems to the North American market. Smart Factory Design is an international public benefit company focused on environmental sustainability and autonomous processes for the Printed Circuit Board, IC Substrate, and General Metal Finishing industries.