Arlon’s 85HP Receives Official IPC Validation to IPC-4101E-WAM1/43
May 24, 2021 | Arlon Electronic MaterialsEstimated reading time: 1 minute
Arlon Electronic Materials is pleased to announce that IPC Validation Services officially recognizes Arlon’s 85HP laminate as having passed all tests that meets or exceeds the product performance requirements of IPC-4101E-WAM1/43. By achieving validation to slash sheet 43, Arlon’s 85HP is distinguished as the most thermally stable, pure polyimide resin system on the market. Specifically, 85HP meets the test criteria for less than 1% coefficient of thermal expansion in the Z axis between 50o to 260o C. In “Time to Delamination” tests at 300o C, 85HP withstood thermal exposure for longer than 60 minutes, far exceeding the slash 43 requirement of 5 minutes. Furthermore, 85HP moisture absorption of 0.19% is well below the slash 43 criteria of 0.5% maximum. CTE (x-y plane) of the 85HP is 17 ppm matching the CTE of copper. In addition to these slash 43 requirements, 85HP has a thermal conductivity of 0.50 W/mK, which is two times (2X) greater than other pure polyimide CCL materials.
These unique attributes are why 85HP is the first polyimide product to be validated to three IPC-4101 slash sheets 40, 41 and 43.
Test results for 85HP’s Validation can be found on the IPC Validation Services website.
Applications for Arlon’s 85HP include high layer count MLB’s incorporating multiple sequential lamination operations, thick copper MLB’s, high power copper internal planes, deep space electronics, down-hole oil and gas drill equipment, engine control modules, rocket motor controls, and avionic electronics.
For additional information, please visit our website at www.arlonemd.com.
Related Article:
Suggested Items
Northrop Grumman honors Calumet Electronics with Supplier Excellence Award
04/17/2024 | Calumet ElectronicsNorthrop Grumman Corporation has recognized Calumet Electronics during the company’s 2024 Supplier Excellence Awards for “exceptional performance and unwavering commitment to delivering with excellence.” Calumet is one of 70 suppliers recognized from across the globe. In its award category of “Supplier Strategic Excellence,” Calumet was honored alongside global corporations such as Amazon Web Services, Dell Technologies, and Eaton Corporation.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
New Yorker, Geyer Electronic Sign New Distribution Agreement
04/16/2024 | New Yorker Electronics Co.New Yorker Electronics, global distributor of electronic components, recently announced a new franchised distribution agreement with Geyer Electronic. Geyer is an international manufacturer of Quart Crystals, Oscillators and Resonators.
IMAPS & IPC to Host Onshoring Workshop
04/16/2024 | IPCThe International Microelectronics Assembly and Packaging Society (IMAPS) and IPC will host an Onshoring Workshop to discuss ongoing progress and forward-looking strategies to drive the Onshoring Advanced Packaging and Assembly, April 29 – May 1, 2024, in Arlington, Virginia.