-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Tips for Designing in—and Escaping From—the Vacuum
May 10, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
For decades, fabricators and PCB design instructors have preached a steady gospel: “Communicate with your manufacturer early and often.” But many designers find themselves working with no idea who will be fabricating or assembling the board, not to mention dealing with the usual missing data, such as impedance requirements.
We asked Monsoon Solutions VP of Engineering Jen Kolar if she had any thoughts on “designing in a vacuum,” and her response was, “Absolutely!” In this wide-ranging discussion, Jen and Senior PCB Engineer and Director of Designer Development Cory Grunwald share some tips and techniques for designing PCBs in a vacuum, and a few methods for getting out of the Hoover’s dust bag.
As Cory points out, “In the end, the communication is going to happen anyway. It’s just a matter of whether it happens at the end or in the beginning.”
Barry Matties: For years, we’ve heard fabricators and design instructors recommend that designers communicate with their manufacturers, and as early in the design process as possible. However, we are often told that the PCB designer does not know who the fabricator is going to be when they embark on the design. As a design service, how do you approach that?
Jen Kolar: That can be one of the big tricks when we’re working with a lot of different customers. If we’re managing the fabrication, then that’s easy. Many of our customers, however, want to be that interface. They want to be the one who passes the data back and forth, and thus things get lost in translation, and that can add a lot of time. We’ve found that can be a real barrier if the designer isn’t able to directly talk to the manufacturer, even if we’re trying to. Our best practice is that our designers always verify information with the fab manager in advance.
Andy Shaughnessy: Everyone talks about DFM and the need for communication, but in the end, there’s almost no communication with the fabricator because they don’t know where the board will be built. So, instead of telling designers to talk to your manufacturer, maybe we should just embrace reality and call it “designing in a vacuum?”
Cory Grunwald: If I’m working with a customer and I don’t know which fab shop I’m going to, I must make a lot of assumptions. I must work over what I expect a minimum trace and space or minimum via sizes will be. I’ll start with a capability sheet from a known supplier that we’ll go through. But then I must add a little bit to what I expect for those tolerances, because I don’t know if they’re going to a shop that can do 3-mil trace and space, or if a shop has to go to 5 mils.
Matties: When you’re designing like that, what’s the downside?
Grunwald: The downside is you can’t be on the cutting edge. You can’t be working on the smallest parts and the thinnest traces and spaces because you don’t know who it’s going to and who can handle it.
Matties: But is the design that you’re allowing some tolerance for still a successful design?
Grunwald: Yes. It can be a successful design, but as you know, projects are getting smaller and faster, and those requirements usually require a top-end board shop. Without talking to your shop directly, you can’t assume that you’re going to a place that can do it.
To read this entire conversation, which appeared in the May 2022 issue of Design007 Magazine, click here.
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.