-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Korf and Strubbe: Material Witnesses
October 3, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
Recently, columnist Dana Korf has been working with Taiwan Union Technology Corporation (TUC), one of the largest providers of copper-clad laminate and mass lamination services in the world. We spoke with Dana about the trends he sees in materials at TUC and around the globe, why copper is still king, as well as some potential non-traditional materials that may see growth soon. Dana invited John Strubbe, TUC VP of technology, to join in the conversation.
Nolan Johnson: Dana, what’s new in the materials world? What are you seeing?
Dana Korf: If you look at straight FR-4, there’s not much going on. There are more high-voltage requirements in the automotive, so there’s a little bit of tweaking of FR-4 to handle voltages around 1,500 or 2,000 volts. Of course, they want long-term reliability, but that’s a relatively minor technical requirement to obtain. With HDI, it’s just a matter of working with thinner glass fabric with the traditional HDI resins, because layers are getting thinner and the number of required lamination cycles increases every year, but that’s more of an adjustment of material properties.
Chip packaging is becoming a constraint. Many companies, like TUC, are now offering chip level packaging materials because there’s just more demand for it than the market can handle. That has a fairly long approval process, just like automotive.
John Strubbe: Most of my work is in low-loss materials for digital. Trying to, as I often say, “get down to free space, no loss,” for the same price as FR-4. There’s a lot of work in copper foil and resins, and a lot of analysis on the glass fabrics. They’re starting to look at quartz again and polymeric materials. They’re trying to get down to really low losses for digital, but the designers are running into the problem that even if you get the losses down to that level, it’s still not good enough. There’s analysis about whether the loss-budget gains you get vs. the cost will be worth it or even possible. That’s what most of the large material folks are working on now. In the RF space, they’re pretty much just working on better controlled RF materials to get the cost down.
Korf: When I was working in China, I was seeing digital designers looking at RF materials to get their losses down. The RF folks were looking at digital performance materials to get the cost down, and that’s still going on. I see that most of the material development work is primarily being driven to reduce the loss, Df, primarily in the digital space. There are umpteen varieties of FR-4, so they seem to be covering the market well; the high voltage for automotive is stressing the specs a little bit, but not too much.
What’s interesting on the material side is we’re starting to look at non-glass alternatives. For example, we’re looking at quartz again, like we did in the 1980s. The problem with quartz glass is that when you hit it with a laser, it melts and balls up. It doesn’t evaporate away. That was a challenge many years ago when we tried it.
Johnson: That makes it tough for laser applications.
Korf: It does make it interesting.
Johnson: What are some of the nontraditional materials being evaluated?
Strubbe: We can talk about the coppers getting down to zero roughness, what’s going on there, and limitations. Does it stick to the resin at the end of the day? Like a lot of technologies, they tend to cycle every 20 or 30 years, and improve with every cycle. Fundamentally, it’s stuff that’s been looked at before.
To read this entire conversation, which appeared in the September 2022 issue of PCB007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.