DownStream Flexes in Rigid-Flex
November 14, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
During PCB West, I caught up with DownStream Technologies co-founder Joe Clark and Senior Product Marketing Manager Mark Gallant. We discussed some of their latest tool updates, including a greater focus on bringing post-processing functionality, such as inter-layer analysis capability, to rigid-flex circuits. Joe also offered a look at global design trends going into 2023, as more engineers take on PCB designer roles while senior designers are retiring.
Andy Shaughnessy: Joe, give us an update on what’s been going on with DownStream for the last year.
Joe Clark: Last year was a record year for us, where we experienced over 10% growth even in the middle of COVID. We’re on track to repeat that again in 2022. Much of that is driven by our major customers adopting design-for-manufacturing and intelligent design formats. A lot of the analysis that used to be done at the end of the design process has been moving “upstream,” and that has implications on the tool capabilities, i.e., it’s got to be easy to use and have low cost of ownership. It’s hard to believe that we’ve been doing this for 20 years.
Shaughnessy: Who knew 2002 was a great time to start a company?
Clark: It was actually the worst time to start a company. But our vision was that design-for-manufacturing analysis would become a mainstream mission-critical requirement, and that the analysis would naturally move upstream. If you remember back when we were PADS, we acquired HyperLynx because our belief was that designers should be doing signal integrity checks during the design creation cycle, not at the end; we were right. We then spun out of Innoveda, took the CAM350 product with us, and added DFM analysis capabilities along with support for intelligent formats (ODB++, IPC-2581) to support in-cycle DFM analysis. We were right again.
Also, as we worked with customers, it became clear to us that another mission-critical part of the process not being addressed was the designers’ need to create detailed documentation for their PCB designs. At the time, they all used their CAD tools, but they were not created to do documentation. PCB documentation is not a “nice to do” thing; it is a necessary thing to do as part of a good new-product design process. Working with customers, and again taking advantage of the shift to neutral intelligent design formats, we developed BluePrint to address the needs for creating quality, adaptable PCB documentation.
Shaughnessy: Most designers love doing layout, but they hate post-processing and documentation creation.
Clark: They hated doing it, especially documentation, in large part due to the nature of the existing tools. They were simply too difficult to use in the design cycle. We focused on providing tools of high functionality combined with ease of use. For PCB documentation, we developed a tool to automate it, to leverage the intelligence of the design to allow users to create, in a very automated way, comprehensive PCB documentation to their particular requirements. Believe me when I say that PCB doc requirements vary greatly company to company and often even division to division. Our BluePrint tool is fully customizable.
Shaughnessy: What is your focus as we head into 2023?
Clark: There are new trends coming, and our most recent focus is on rigid-flex. Working with companies like Microsoft, we realized that there are really no tools to address a host of new challenges: multiple stackup regions, the potential problems from bending a circuit, inter-layer dependencies, and other such technological obstacles.
To read this entire conversation, which appeared in the November 2022 issue of Design007 Magazine, click here.
Suggested Items
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/12/2024 | Nolan Johnson, I-Connect007As we publish this week’s most-read news, the I-Connect007 team is wending its way home from an eventful and productive week at IPC APEX EXPO in Anaheim, California. We’ve posted a variety of dispatches from the show this week, released 73 realtimewith.com video interviews (and counting), and also gathered the content and updates you’ll be looking for in the upcoming issue of Show & Tell… IPC APEX EXPO 2024.
Material Insight: The Importance of Standards for the Chip Packaging Industry
04/12/2024 | Dr. Preeya Kuray -- Column: Material InsightI had the great pleasure of recently attending the National Institute of Standards and Technology’s (NIST) CHIPS R&D Chiplets Interfaces Technical Standards Workshop. The purpose was to bring together technical experts across industry and academia to deliberate one of the most pressing technological matters of 2024: chip packaging standards.
What’s New in Design Education at IPC APEX EXPO?
04/11/2024 | Kelly Allen, IPC Training ManagerKelly (Kel) Allen shares her thoughts on the educational offerings at IPC APEX EXPO and beyond. In this interview, she discusses some of the newest classes taking place during the conference in Anaheim, covering everything from design, fab, and assembly through mil/aero, test, and supply chain issues.