A Summary of Various Test Requirements


Reading time ( words)

IPC Class 3

The PCB industry has advanced significantly in the recent millennium. OEM specifications and requirements have also advanced due to the maturing of technologies, which has caused the requirements of electrical test of these higher technology products to advance and increase in intensity. Obviously, the more mature a technology, the finer the lines and spaces must be, the more hole and vias must be present, and the more complex the testing must become. There is just more to test in a smaller amount of space.

Long gone are the “pin-in-hole” technology PCBs, which are now surpassed by the large multilayer, blind/buried and rigid-flex technologies. For the suppliers of electrical test, be it in-house test departments or sub-contracted, the industry specifications can be confusing, and at times incomprehensible.

The OEMs direct the IPC specification (6012, 9252A, AS9100, etc.) for their fabrication to the manufacturer, but in many cases do the OEMs or CMs really know what they are asking for? Do they really understand what they are requiring and how complicated it may be?

There are many variables associated with these specifications and requirements to their designated classes regarding electrical test. OEMs  often overlook the electrical properties associated with IPC class performance requirement, and  of course, this can be a problem. Manufacturing, plating, etching and all those processes may be within the class requirements.

During the coming months, I will discuss various aspects and intricacies of electrical test. To get started, I will address IPC class 1, 2, and 3

Class I: General Electronic Products

This class includes consumer products, some computer products and computer peripherals suitable for applications where cosmetic imperfections are not important, and the major requirement is function of the completed board.

Read the full column here.


Editor's Note: This column originally appeared in the April 2014 issue of The PCB Magazine.

Share

Print


Suggested Items

MivaTek’s New Technology and Market Drivers

01/19/2021 | Nolan Johnson, PCB007 Magazine
I recently spoke with Brendan Hogan about the upcoming new product releases from MivaTek. The conversation flows naturally from the new product’s market drivers to the X=Xc – 1 idea that is at the core of the market drivers.

Happy Holden: ECWC15 Virtual Event a Success

12/15/2020 | Happy Holden, I-Connect007
This is the first Electronic Circuits World Convention that I have not attended in person since 1978. To refresh your memory, these are held every three years on a rotating basis. The HKPCA hosted this year’s conference and they kept up the fine tradition of collecting outstanding keynotes, nearly 60 technical presentations and myriad poster papers. HKPCA was also kind enough to provide English slides and translations. It is still possible to sign up and view the presentations. I have listened to 20 of the presentations, and hope to attend even more in the coming days as they are all worth watching.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/11/2020 | Nolan Johnson, I-Connect007
This week’s mainstream news was dominated—well, my personalized online news feed was, at least—by ballistics. SpaceX was in the news daily for lobbing multiple pieces of iron, even as their CEO took his household suborbital, leaving California and touching down in Texas. Pandemic numbers charts continue their skyward trajectory worldwide. The ever-present military tests and technology demonstrations, seemed a bit more commonplace this week as well. Worldwide political news, in general, seemed to follow parabolic curves like an Australian boomerang, veering off in unexpected ways only to suddenly cut a curving path and return.



Copyright © 2021 I-Connect007. All rights reserved.