Trending at Freedom CAD: New Crop of Next‐Gen Designers


Reading time ( words)

Scott McCurdy, director of sales and marketing at Freedom CAD Services, expresses his vision for what North America is bringing to the table in the world of circuit design. I‐Connect007 Publisher Barry Matties and McCurdy also discuss China, trends in product design, tools, and more.

Barry Matties: Tell me a little bit about Freedom CAD. What does the company do, exactly?

Scott McCurdy: Freedom CAD is one of the largest printed circuit design engineering service bureaus in North America. We’re primarily known for PCB layout which is where we have the largest number of our employees, with about thirty layout designers. We also go upstream as well, with electrical engineers doing hardware design. The EE guys (electrical/electronics engineers) work from the customer’s block diagram sketch to create the digital schematic; then we’ll do the layout.

Freedom_CAD_hq.jpgBut we also go in the other direction: When we get the opportunity with our customers, we can provide prototype assemblies.  We manage the projects, working with a few select partners for PCB fabrication, component kitting, and assembly houses. We’re really only dealing with prototypes builds, but it’s that entire cradle‐to‐grave span that we can provide to our customer, to take them from the sketch pad to the working PCB assembly.

We’re basically providing the engineering that will ultimately turn into a circuit board.

Matties: You’ve been at this for how long?

McCurdy: I have been at it for a few years. I got started in 1968 and opened a little printed circuit board shop with my dad.

Matties: McCurdy Circuits?

McCurdy: Yes. Dad got it off and running and a decade later I took over the company and over the following 20+ years grew it to $33 million. Then came the cataclysmic event of 2001. Lots of headstones in the PCB fabricators graveyard! McCurdy Circuits was one of them. I stumbled into the IPC Designers Council. All of a sudden, my eyes opened up that the design side of this business was a great place for my previous fab skills.

I’ve been the president of the Orange County Chapter of the IPC Designers Council since 2003 and really enjoy being able to bring designers and fabricators together. This way we can learn more about what each other is doing and actually create some reality out of that term “DFM.”

Matties: Is your customer base primarily in the U.S., or are you in the global market?

McCurdy: We do very little outside of North America. There are a lot of our customers who are designing and engineering in the States but they’re building it somewhere else. That’s just the way it is today, but they do appreciate the mindshare of same time zones, and we’ve got designers in 13 states and British Columbia, so we’re scattered all over the country. There is the comfort level of talking in the same language and being in close time zones and cultures and things like that. Not that we don’t feel that there are other parts of the world that are making a great contribution to this interconnect industry, we’re just primarily North America—that is our main customer base.

Matties: One of the things that I’m hearing is that China is really coming on strong in the design sector.

Share




Suggested Items

Design Tips for Lowering Costs of Fab and Assembly

08/25/2022 | Cherie Litson, CID+, Litson1 Consulting
This is the million-dollar question of every project: How can I cut the cost of the PCB? There are about a thousand answers to this question. There are a few simple guidelines that everyone can follow to reduce costs. I talk about them in my IPC CID and CID+ courses. Designers, fabricators, and assemblers talk about them in a variety of articles. Some professionals who have published some great articles on cost-saving strategies include Tara Dunn, Happy Holden, Chris Church, Kella Knack, Judy Warner, Julie Ellis, Lars Wallin, and many, many others.

What Happens When You Assume?

07/05/2022 | I-Connect007 Editorial Team
What is design with manufacturing and what does true DWM look like in operation? In this interview, I-Connect007 columnist Dana Korf explains what it will take to achieve total communication among all the stakeholders in the PCB development cycle. He also stresses the need for everyone involved in PCB design and manufacturing to stop making assumptions, even at the risk of being labeled as “that guy” who asks too many questions.

Altium Invests in Future Designers

04/13/2022 | Andy Shaughnessy, Design007 Magazine
While at IPC APEX EXPO, I stopped by the Altium booth to visit with Rea Callender, vice president of education at Altium. Rea shared information about the company’s recent design competition for students around the world, as well as a new curriculum that is drawing interest from some unique locations.



Copyright © 2022 I-Connect007. All rights reserved.