Isola Launches Low-loss Laminate for 100 GB Ethernet Apps


Reading time ( words)

I spent time at IPC APEX EXPO 2015 talking about Isola’s launch of a low-loss, low-skew laminate prepreg with Fred Hickman, senior director of high-speed digital products. Hickman explains that the new material, Chronon, will be one of the enablers of 100 GB Ethernet applications.

Pete Starkey: Fred, it’s great to meet you. As the senior director of high-speed digital products at Isola, you are the ideal person to tell us about the new product launch. The brand is Chronon and it's a low-loss, low-skew laminate prepreg. Could you just give me a short introduction to this material?

Fred Hickman: Thanks for coming by, Pete, and thank you for giving me a chance to introduce you and your readers to Chronon. Chronon is indeed a new low-loss material for us. Essentially, it's one of the enablers, we think anyway, for 100 GB Ethernet applications, with a combination of good DK, 3.64 DK, less than .004 loss, but also excellent for skew. Fiber weave affects skew so it is a skew mitigator. So what we're proposing for people who currently use other competitive materials on the market, this is a drop-in material with very similar electrical, but very much improved skew mitigation capabilities.

So we have this product, Chronon, and last year we also introduced Tachyon 100G. Both have lower insertion loss, but Tachyon does not have the same ability to mitigate skew as Chronon.

Starkey: Are you in a position to give me a brief explanation as to how you've gone about minimizing the skew? What is it about normal materials that causes skew and how can that be overcome?

Hickman: With most materials, when you change the resin content it has a very big impact on the DK of the material. For instance, our best skew mitigator is GigaSync, changing the resin content from 50% all the way up to 75% and you get about a 3% change in the DK. So if you have lines going across resin/glass it doesn't matter because the DK basically stays the same. With Chronon, the DK change is only about 9% and in that same range, but with most other materials the DK range is around 20%.

Starkey: Oh, I see.

Hickman: So essentially what we're doing is using a combination of spread glass, also some proprietary engineering techniques with which we're minimizing the weave effect of glass.

Starkey: I understand now. It’s really on a microscopic scale. Because there's such a difference in product and concept between glass and resin, if you've got a material where the signal has a glass-rich area and a resin-rich area, you can sort of smooth that out while still keeping the benefits of woven glass reinforcement, but having that reinforcement much more uniformly distributed through the substrate.

Hickman: Absolutely. You hit it right on the head.

Starkey: Well, Fred. Thanks very much indeed.

Hickman: Thank you, Pete. 

Share




Suggested Items

Why Gold Layer Thickness in ENIG Matters for Soldering

02/07/2023 | Britta Schafsteller, Mario Rosin, Gustavo Ramos, and Joe McGurran, Atotech
The main task of the final finish is to protect the copper pad from tarnishing or oxidation while simultaneously keeping the surface active for the assembly. Electroless nickel/immersion gold (ENIG) is a widely accepted finish in the market that provides a good solderability and capability for Al-wire bonding. A main function of the gold layer is to prevent the oxidation of the nickel layer.

Real Time with... IPC APEX EXPO 2023: Next-Generation Personnel

02/07/2023 | Real Time with...IPC APEX EXPO
Pete Starkey talks with Chris Hrusovsky of International Electronic Components (IEC) about the work they have done with their business partners, Sigma Mecer & ASS-Luippold, and the next generation of personnel within IEC. If you were unable to attend IPC APEX EXPO 2023, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

I-Connect007 Editor’s Choice: Five Must-Reads For the Week

02/03/2023 | Nolan Johnson, I-Connect007
It’s Feb. 3, 2023—2/3/23—and now we know the results of yesterday’s Groundhog weather forecast straight from Gobbler’s Knob in Pennsylvania. Punxsutawney Phil says six more weeks of winter. If you’re watching the ongoing ice storms blanketing much of the United States at present, that seems like a safe bet. Also a safe bet is that the most-read news this week is IPC APEX EXPO related. Additionally, this week IPC published its EMS and PCB numbers for December. All told, lots of industry news to read this week.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.