Manufacturing Technology Orders Fell in April
June 16, 2015 | AMTEstimated reading time: 1 minute
April U.S. manufacturing technology orders totaled $384.81 million according to AMT – The Association For Manufacturing Technology. This total, as reported by companies participating in the USMTO program, was down 8.1% from March’s $418.67 million and down 1.0% when compared with the total of $388.51 million reported for April 2014. With a year-to-date total of $1,458.90 million, 2015 was down 8.5% when compared with 2014.
These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTO program.
“Right now capital equipment makers are feeling the effects of a stronger dollar, which creates a drag on exports, and lower oil and natural gas prices, which means less spending on equipment investments from the energy industry,” said AMT President Douglas K. Woods. “But what is a negative now should help us later – imported components for capital equipment are costing less, and businesses will accumulate savings from lower fuel prices in the coming months, meaning more money for capital investment. We believe investment in manufacturing will remain steady, and overall performance for the year will be as strong as we saw in 2013 and 2014.”
The United States Manufacturing Technology Orders (USMTO) report, compiled by the trade association representing the production and distribution of manufacturing technology, provides regional and national U.S. orders data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology orders provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.
U.S. manufacturing technology orders are also reported on a regional basis for six geographic breakdowns of the United States.
Northeast Region
Northeast Region manufacturing technology orders in April stood at $65.95 million, 11.5% less than the $74.55 million total for March but 6.9% more than the $61.71 million for April 2014.
Southeast Region
Year-to-date manufacturing technology orders for the Southeast Region totaled $127.35 million, down 14.3% from the 2014 total at the same time.
North Central-East Region
With an April total of $127.57 million, North Central-East Region manufacturing technology orders were up 4.1% from the $122.53 million tally for March and up 29.9% when compared with April a year ago. Year-to-date orders totaled $417.42 million, down 10.5% from the comparable figure for 2014.
North Central-West Region
Manufacturing technology orders in the North Central-West Region in April totaled $69.14 million, 4.8% more than in April 2014.
South Central Region
South Central Region year-to-date manufacturing technology orders for 2015 totaled $124.44 million, down 47.9% from the comparable figure for 2014.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.