Fast Interconnect: Engineering Services for the Masses

Reading time ( words)

Griffin: This service encompasses as many or as few of our available services as the customer may require. Our engineering community is made up of specialists in innovative and cost-effective embedded product development technologies. They can do it all for you. 

Product development is a complex problem that requires a multi-disciplinary approach for fast and innovative solutions. Our engineering resources feature a combination of expertise in hardware, firmware/software, board design and product integration that can shorten the overall product development time. We help you in selecting the right hardware and software components, designing and prototyping the complete product or part of the product, developing the firmware and software, integrating the hardware and software modules, and delivering a finished product. With our agile-oriented process approach, product quality is assured at every stage of the product development life cycle.

The customer sends us an idea and we develop it. It sounds pretty simplistic, but of course there are many steps involved as I mentioned earlier, and we help the customers navigate through the process. There are many checkpoints along the way to make sure that the development process is still on the path to the final product that the customer has envisioned.

There are costs associated with these steps, which should not be a surprise, but there is not anyone out there, at least in the USA, that can compete with us. At least this is what I think and feel to be true. Of course, if the customer has done his or her homework, the cost will be lower. The more the customer can supply and define, the more positive the impact on development costs will be. If a customer just says, “Hey, I thought up this cool gizmo and I want to connect it to this or that,” all they have to do is tell us what the input needs to be and what the output needs to be, and we will do the rest. If you don’t know, just tell us what you want it to do and we will do all of the work. 

A really important facet of this business model is that we can protect the customer’s ideas so that the ideas remain theirs. If the customer wants to have that protection, we have a contract that will provide that for them.

Shaughnessy: I know Fast Interconnect offers IoT solutions. Isn’t this an exciting time to be in that space, with so many IoT developments happening almost daily? 

Griffin: Yes, in today’s IoT era, every device that has electronics and embedded software is connected. With every device becoming a smart device, a whole new era of smart solutions are becoming a reality. With our strong expertise in sensor technologies, ultra-low microcontrollers and wireless communication we build custom devices for specific business needs. 

We design the hardware and add intelligence to our device solutions with technologies such as Bluetooth Low Energy, ZigBee and WLAN. Our firmware and software are intelligently engineered for low-power operation. We also build the IoT gateways to connect the smart devices to the external world. With our Android mobile application, the smart devices can be monitored and controlled from anywhere, anytime.

Shaughnessy: Are your engineers located around the globe, or just in North America?

Griffin: Out of necessity, this is a worldwide effort.

Shaughnessy: Have you seen an increase in RF and mixed-signal design work lately?

Griffin: Personally, RF means a lot of things to different people, and RF to me is 100MHz and up. To some it is in the kHz range. So yes, there have been quite a few projects in these ranges. As for mixed-signal projects, yes, all of the time. It seems that mixed-signal is the rising star.

Shaughnessy: What do you see as the biggest challenges in this industry?

Griffin: For the customer, I would say that cost is the biggest challenge. Engineers tend to be expensive and it costs a lot to run a traditional “brick and mortar” engineering company that houses the engineers and the overhead associated with that.  As I mentioned, think of us as the Internet of Product Development. We don’t have the overhead and there are quite a few engineers out there that feel the same way I do. The cost is just too high. I feel this business model is the answer.

The second-largest challenge a customer faces is just getting the attention of an engineering company. Please, don’t get me wrong. There are some really amazing companies out there. However, with amazing companies you get an amazingly high cost.

Also, semiconductors with fast switching rates and rise times are more common these days. What worked well in a previous design might not work for the upcoming signal frequency range and switching rates. The designed interconnects that were transparent to the circuit performance in the past are not going to be the same now. A guy working out of his second bedroom probably hasn’t kept up with stuff like this.

For the increasing switching rates and frequency of operation, the parasitic of the interconnect might degrade the actual circuit performance, and as we move towards more sharp rising/falling edges we are facing a higher level of difficulty in the future. Constant research in layout and interconnect implementation and spending more time in signal integrity and power integrity simulations are the best ways to face these challenges, and our team does this day to day.

Shaughnessy: What are your plans for the company for the next 2-5 years or so? 

Griffin: Our current plan is to grow this business and help people realize their dreams to develop cool gadgets. Almost anyone can come up with an idea, but they just don’t know how to implement them.

Also, helping out small businesses with their new product development enables them to save a lot of cost and headache over what they currently experience with the traditional engineering companies or individual designers working from home. Yes, some are really good, but they are all limited, and Fast Interconnect is not limited at all. 

With all of this going for us, I think that we can grow and really take advantage of this business model, help people realize their product needs and help small businesses with their engineering needs. What about the big guys out there?  If they need some cost-effective help, we are here for you too.

Shaughnessy: It sounds like an innovative idea. Thanks for speaking with us, Gary.

Griffin: Thank you for the opportunity.


For more information, visit


Suggested Items

DownStream Flexes in Rigid-Flex

11/14/2022 | Andy Shaughnessy, Design007 Magazine
During PCB West, I caught up with DownStream Technologies co-founder Joe Clark and Senior Product Marketing Manager Mark Gallant. We discussed some of their latest tool updates, including a greater focus on bringing post-processing functionality, such as inter-layer analysis capability, to rigid-flex circuits. Joe also offered a look at global design trends going into 2023, as more engineers take on PCB designer roles while senior designers are retiring.

Sunstone’s Matt Stevenson Shares Insights From New PCB Design Book

10/27/2022 | Nolan Johnson, I-Connect007
There’s designing the “perfect” circuit board and then there’s designing a board that is “perfect for manufacturing.” While seasoned designers and design engineers understand many of the nuances, PCB fabricator Sunstone Circuits has just published a new book specifically for new designers who have the knowledge of design but are still learning what it means to get the board manufactured. Sunstone’s Matt Stevenson takes the reader through a series of situations that should help clarify what’s happening in the fabrication process and how to adjust a board design to be better suited for manufacturing.

Forming Standards for Ultra HDI

10/25/2022 | Andy Shaughnessy, Design007 Magazine
To get the latest news about ultra high-density interconnections (UHDI), we checked in with Jan Pedersen, NCAB Group’s director of technology. Jan is co-chair of IPC D-33AP, and a great source of overall DFM expertise as well. We asked him to give us a snapshot of UHDI in the industry, where we’re headed, and what this means to PCB designers.

Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.