Conflict Minerals Study: Only 25% of Filers Fully Met Dodd-Frank Section 1502 Requirements in 2014


Reading time ( words)

A recent, independent evaluation of the public company “conflict mineral” filings submitted to the SEC for reporting year 2014 under Dodd-Frank Section 1502 found that of the 1,262 companies evaluated, 312 scored a perfect 100% and 245 scored below 75% in meeting the requirements of the SEC rule.

The most noticeable shortcoming was that more than half of the filers did not disclose country or countries of origin of the conflict minerals in their products). Almost half of the filers did not disclose the facilities used to process the necessary 3TG.

The study evaluated the filers’ conflict minerals disclosures against two sets of criteria: those established by the SEC rule and a non-binding “good practice” metric developed by the Responsible Sourcing Network (RSN), a human rights organization and Sustainalytics, a research firm specializing in environmental, social and governance analysis. While the majority of filers met most of the regulatory requirements, most scored significantly lower on the “good practice” measures.

The study was designed and executed by Chris N. Bayer, Ph.D., with the assistance of a broad advisory panel comprised of Fern Abrams of IPC, Lawrence Heim of Elm Sustainability Partners, Michael Littenberg of Schulte, Roth & Zabel, Charles Riepenhoff, Jr. of KPMG and Jonathan Hughes of Assent Compliance.

IPC members interested in learning more about the study are invited to attend a free webinar by Dr. Bayer on September 15.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

IPC Standards Development: Business Challenges and an Inside View

10/28/2020 | Graham Naisbitt, Gen3 Systems
With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2020 I-Connect007. All rights reserved.