Electric Field Control of Magnetic Moment in Palladium
October 1, 2015 | University of TokyoEstimated reading time: 2 minutes
Researchers at the University of Tokyo and Central Research Institute of Electric Power Industry have successfully induced a magnetic moment in palladium (Pd), usually a non-magnetic material, and demonstrated the ability to reversibly control the strength of the magnet by applying an electric field. This research has demonstrated the possibility of electrically inducing magnetism in non-magnetic materials.
If the properties of a material could be electrically tuned after production, it would be possible to easily obtain the desired functions when needed, further increasing the range of materials that could be used in magnetic devices. In fields that employ magnetic materials, tuning of magnetic force and control of magnetization direction (together, these properties are termed the “magnetic moment”) has been demonstrated by applying a voltage to a capacitor containing a magnetic film as one electrode and charging and discharging charge carriers (electrons) from the electrode. It is expected that this method will dramatically reduce power consumption compared to conventional means of controlling magnetic moment (heating, magnetic field or electric current application).
Prior studies have reported that it is possible to erase the magnetic properties of a material by the application of an electric field. However, there are no reports of successfully inducing and cancelling magnetic properties in a non-magnetic material by the same method.
The research group of Associate Professor Daichi Chiba at the University of Tokyo Graduate School of Engineering and the Central Research Institute of Electric Power Industry has shown that the strength of a magnetic moment induced in palladium, a metal which is usually non-magnetic, is electrically controllable, and that application of a positive voltage induces a stronger magnetic moment than a negative voltage. The research group fabricated an ultra-thin cobalt/palladium structure in which a ferromagnetically ordered magnetic moment was induced in the top palladium layer by the ferromagnetic proximity effect. The magnetic moment in this Pd layer was reversibly controlled by applying a voltage.
“This offers a new avenue for making non-magnetic materials ferromagnetic,” says Associate Professor Chiba of this latest research. He continues, “If it becomes possible to easily and reversibly induce magnetic properties in a non-magnetic material by applying an electric voltage, we may be able to make use of many materials currently not used in the field of magnetic engineering and further increase the range of materials available for use in magnetic devices.”
This research was carried out in collaboration with Senior Research Scientist Shinpei Ono at the Central Research Institute of Electric Power Industry Materials Science Institute.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.