Extending a Battery's Lifetime with Heat
October 2, 2015 | AIP.orgEstimated reading time: 2 minutes
Don't go sticking your electronic devices in a toaster oven just yet, but for a longer-lasting battery, you might someday heat them up when not in use. Over time, the electrodes inside a rechargeable battery cell can grow tiny, branch-like filaments called dendrites, causing short circuits that kill the battery or even ignite it in flames. But thanks to new experiments and computer simulations, researchers from the California Institute of Technology have explored in detail how higher temperatures can break down these dendrites — and possibly extend battery lifetimes.
A battery cell consists of a positive and negative electrode, called the cathode and anode. As the battery produces electrical current, electrons flow from the anode through a circuit outside the battery and back into the cathode. Having lost the electrons that are generating the current, some of the atoms in the anode — an electrically conductive metal like lithium — become ions that then travel to the cathode, moving through a conductive liquid medium called an electrolyte.
Recharging the battery reverses the process, and the ions travel back and stick onto the anode. But when they do, the ions don't attach evenly. Instead, they form microscopic bumps that eventually grow into long branches after multiple recharging cycles. When these dendrites reach and contact the cathode, they form a short circuit. Electrical current now flows across the dendrites instead of the external circuit, rendering the battery useless and dead.
The current also heats up the dendrites, and because the electrolyte tends to be flammable, the dendrites can ignite. Even if the dendrites don't short circuit the battery, they can break off from the anode entirely and float around in the electrolyte. In this way, the anode loses material, and the battery can't store as much energy.
"Dendrites are hazardous and reduce the capacity of rechargeable batteries," said Asghar Aryanfar, a scientist at Caltech, who led the new study that's published this week on the cover of The Journal of Chemical Physics, from AIP Publishing. Although the researchers looked at lithium batteries, which are among the most efficient kind, their results can be applied broadly. "The dendrite problem is general to all rechargeable batteries," he said.
The researchers grew lithium dendrites on a test battery and heated them over a couple days. They found that temperatures up to 55 degrees Celsius shortened the dendrites by as much as 36 percent. To figure out what exactly caused this shrinkage, the researchers used a computer to simulate the effect of heat on the individual lithium atoms that comprise a dendrite, which was modeled with the simple, idealized geometry of a pyramid.
The simulations showed that increased temperatures triggered the atoms to move around in two ways. The atom at the tip of the pyramid can drop to lower levels. Or, an atom at a lower level can move and leave behind a vacant spot, which is then filled by another atom. The atoms shuffle around, generating enough motion to topple the dendrite.
By quantifying how much energy is needed to change the structure of the dendrite, Aryanfar said, researchers can better understand its structural characteristics. And while many factors affect a battery's longevity at high temperatures — such as its tendency to discharge on its own or the occurrence of other chemical reactions on the side — this new work shows that to revitalize a battery, all you might need is some extra heat.
Suggested Items
American Made Advocacy: Going Beyond the CHIPS Act to Power American Manufacturing
03/26/2024 | Travis Kelly -- Column: American Made AdvocacyWhere have all the factories gone? A tour of America’s former bustling manufacturing communities is a stark reminder that, for the past three decades, we let the microelectronics manufacturing ecosystem disappear overseas, primarily to Asia. For decades, foreign competitors seeking to control critical markets played a long game. Government investment and subsidies were effective in undercutting U.S. and European companies. As other countries created this unfair competitive advantage in manufacturing, the know-how also migrated in their direction. This resulted in the serious workforce challenges the semiconductor and printed circuit board industries face today.
Dave Brooks Celebrates 25 Years at IEC USA
03/26/2024 | IECPlease join IEC (International Electronic Components) in congratulating Dave Brooks on 25 years of service and camaraderie. As one of the original members of the IEC USA team, Dave is a valuable contributor to IEC's continued success.
MacDermid Alpha Electronics Solutions’ New Book Now Available for Download
03/27/2024 | I-Connect007I-Connect007 is pleased to announce the launch of The Printed Circuit Assembler’s Guide to… Encapsulating Sustainability for Electronics by Beth Turner at MAES. The latest in a series of educational books published by I-Connect007, this book is an introductory guide to understanding encapsulation resins and a tool for application troubleshooting.
Green Circuits Unveils Innovative Stacked Capacitors Assembly Process
03/21/2024 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, today announced a groundbreaking advancement in process engineering with the successful implementation of an innovative assembly technique for stacked capacitors.
Happy’s Tech Talk #26: Balancing the Density Equation
03/14/2024 | Happy Holden -- Column: Happy’s Tech TalkPrinted circuit design and layout is a creative process that has profound implications for electronic products. With the need for more parts on an assembly, or the trend to make things smaller to be portable or for faster speeds, the design process is a challenging one. The process is one of “balancing the density equation” (Figure 1) with considerations for certain boundary conditions like electrical and thermal performance. Unfortunately, many designers do not realize that there is a mathematical process to the layout of a printed circuit