The Shaughnessy Report: Car Talk


Reading time ( words)

My girlfriend Rita doesn’t like to drive in traffic. As an Atlanta resident, this is a problem for her, because Atlanta has some of the worst traffic jams in the U.S. (I think it’s worse than Los Angeles; I’ve never sat for three hours in the same spot in LA.) So, after her last motoring miscue, she bought a new Mazda 3—the cheapest car Mazda makes—but it’s tricked out with every anti-collision feature available.

Now, it’s almost impossible for Rita to trade paint. Hit the turn signal when another car is passing, and all kinds of alarms go off. If you drift over and touch the yellow line on either side, the car starts beeping like crazy. If the car ahead of you slows down when cruise control is engaged, the car applies the brakes automatically and keeps you a certain number of car lengths behind Mr. Slowpoke. And if the reverse video doesn’t do the trick, the car starts beeping if you’re about to back out in front of a vehicle that you can’t see.

Yes, I poked fun at Rita for having all of these countermeasures beeping and pinging, but they work great. You can even turn them off, which I would do if I had to drive her car for any length of time.

Plus, the entertainment system has a great GUI; you feel like you’re sitting in your couch at home, flipping through the channels. You barely have to take your eyes off the road (or the handy speedometer in the heads up display) to find another CD on your phone’s Bluetooth, which is the point.

All of these electronic features come at a price, though: about $5,000, in this case. But we’re willing to shell out extra cash for features that will make us feel safe, or offer us greater convenience or entertainment.

Yes, the automotive electronics segment has exploded. Early cars didn’t have much in the way of electronics. Even in 1950, electronics made up only 1% of a car’s cost. (That was probably just the Philco AM radio.) But that figure is expected to hit 35% in 2020, and 50% in 2030. The global automotive electronics market is forecast to hit $314.4 billion by 2020, and that means a whole lot of PCBs.

And that’s where we come in! This issue of The PCB Design Magazine features a cover story “Automotive Systems Design: a Support Engineer’s Perspective,” written by Monica Andrei of Continental Automotive Systems. As a design support engineer, she supports 1,700 PCB designers across dozens of countries, speaking a variety of languages. In this article, Andrei explains in detail how Continental transitioned from a traditional PCB design structure to a true systems design approach.

To read this entire article, which appeared in the September 2015 issue of The PCB Design Magazine, click here.

Share




Suggested Items

DownStream Flexes in Rigid-Flex

11/14/2022 | Andy Shaughnessy, Design007 Magazine
During PCB West, I caught up with DownStream Technologies co-founder Joe Clark and Senior Product Marketing Manager Mark Gallant. We discussed some of their latest tool updates, including a greater focus on bringing post-processing functionality, such as inter-layer analysis capability, to rigid-flex circuits. Joe also offered a look at global design trends going into 2023, as more engineers take on PCB designer roles while senior designers are retiring.

Sunstone’s Matt Stevenson Shares Insights From New PCB Design Book

10/27/2022 | Nolan Johnson, I-Connect007
There’s designing the “perfect” circuit board and then there’s designing a board that is “perfect for manufacturing.” While seasoned designers and design engineers understand many of the nuances, PCB fabricator Sunstone Circuits has just published a new book specifically for new designers who have the knowledge of design but are still learning what it means to get the board manufactured. Sunstone’s Matt Stevenson takes the reader through a series of situations that should help clarify what’s happening in the fabrication process and how to adjust a board design to be better suited for manufacturing.

Forming Standards for Ultra HDI

10/25/2022 | Andy Shaughnessy, Design007 Magazine
To get the latest news about ultra high-density interconnections (UHDI), we checked in with Jan Pedersen, NCAB Group’s director of technology. Jan is co-chair of IPC D-33AP, and a great source of overall DFM expertise as well. We asked him to give us a snapshot of UHDI in the industry, where we’re headed, and what this means to PCB designers.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.