FTG Circuits - Chatsworth California Qualified to MIL- PRF-31032


Reading time ( words)

The FTG Circuits - Chatsworth California facility (incorporated as FTG Circuits Inc.) has been qualified to the Department of Defense performance specification MIL-PRF-31032/3 (flexible printed wiring boards) and MIL-PRF-31032/4 (flex-rigid printed wiring boards).  MIL-PRF-31032 qualification also allows FTG Circuits - Chatsworth to continue to manufacture and certify products to MIL-PRF-50884.

Qualification to these specifications results in FTG Circuits - Chatsworth being listed on the DLA Qualified Manufacturing List (QML) that is used by existing and potential customers to select qualified suppliers of these product types.

The rigorous qualification process included DLA on-site audits, qualification of our testing laboratories, documentation audits, the manufacture of qualification test vehicles and environmental / reliability product testing.  

The qualified technical scope allows FTG Circuits - Chatsworth to manufacture and certify high technology (HDI) flex and flex rigid printed wiring boards that contain up to 35 layers, includes micro vias and a variety of surface finishes and other technical attributes. This advanced technical scope positions the site as one of the top two technically qualified flex / rigid flex manufacturers in the world. 

"MIL-PRF-31032 qualification is a very important milestone as it not only allows us to capture defense programs; it also demonstrates that FTG Circuits – Chatsworth is committed to continuous improvements in quality and reliability to meet the expectations of FTG’s Defense and Aerospace focused customer base." said Michael Labrador, President of FTG Circuits Inc.

"FTG is committed to Operational Excellence across the Corporation and the continuous improvement of our process controls, reliability and quality systems are an important part of these efforts." stated Brad Bourne, President and Chief Executive Officer of FTG Corporation. 

More information on the DLA and the MIL – PRF 31032 QML program can be found here.

About Firan Technology Group Corporation

FTG is an aerospace and defense electronics product and subsystem supplier to customers around the globe.  FTG has two operating units:

FTG Circuits is a manufacturer of high technology, high reliability printed circuit boards.  Our customers are leaders in the aviation, defense, and high technology industries. FTG Circuits has operations in Toronto, Ontario, Chatsworth, California and a joint venture in Tianjin, China.

FTG Aerospace manufactures illuminated cockpit panels, keyboards and sub-assemblies for original equipment manufacturers of aerospace and defense equipment. FTG Aerospace has operations in Toronto, Ontario, Chatsworth, California and Tianjin, China.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

08/05/2022 | Nolan Johnson, I-Connect007
The Top 5 list this week contains industry analysis from IPC’s Shawn DuBravac, news on the passage of the U.S. “CHIPS Plus” bill, new materials from Ventec, news about a fab for sale, and a chemistry company completing their acquisition, plus a brand new book in the I-Connect007 eBooks series.

Review: Institute of Circuit Technology 2022 Annual Symposium

06/15/2022 | Pete Starkey, I-Connect007
The British Motor Museum in Warwickshire, housing the world's largest collection of historic British cars, was venue for the 2022 Annual Symposium of the Institute of Circuit Technology on June 8, which attracted a substantial gathering of manufacturers and suppliers from the UK printed circuit industry. ICT chair Emma Hudson reflected upon lessons learned during the pandemic lock-down and how the industry has successfully adapted to circumstances. She commented that the UK’s PCB fabricators are extremely busy, as she introduced an outstanding conference programme including a keynote from the incomparable Happy Holden.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/03/2022 | Andy Shaughnessy, Design007 Magazine
Things are heating up in the world of PCB design and manufacturing as well. In the past week, we published quite a bit of news—some good, some not so good. Some of the news is mixed, as we see with the EMS industry shipments rising YOY in April, but falling from the previous month. It’s nice to see NASA investing in American small businesses, but they didn’t really have a choice, did they?



Copyright © 2022 I-Connect007. All rights reserved.