Record Efficiency with Tandem Solar Cells
March 4, 2016 | TU EindhovenEstimated reading time: 1 minute
On Thursday Alice Furlan receives her PhD for her study in which she experimented with stacking different types of material layers in flexible, thin solar cells. By combining these with a thin layer of silicon into a ‘tandem solar cell’ she, along with researchers from TU Delft, achieved a record level of efficiency in this kind of hybrid solar cell.
Flexible, plastic solar cells are an attractive alternative to the current standard crystalline silicon solar cells (with their characteristic gray-blue color). Using organic materials makes for easier and cheaper production while the printable, bendable character means they can be used in a wide variety of situations. The problem, however, is the yield.
Plastic combination
In her PhD thesis, Alice Furlan, PhD student in the Molecular Materials and Nanosystems group of professor René Janssen at the Department of Chemical Engineering, tested how you can best combine two or three different layers of semi-conductive plastic. Given that each type of plastic absorbs a different color light, the idea is that by combining these, you can utilize a larger portion of the incoming sunlight. Furlan also looked at the electrical connections between the different layers, where losses tend to be greatest.
Marriage
She hit the jackpot of her research together with colleagues from TU Delft, combining the Eindhoven plastic cells with thin layers of amorphous silicon to a ‘tandem solar cell’. This ‘marriage’ of two different kinds of absorption material – silicon and plastic – led to an efficiency of 13.2%. Never before had such cells generated such a high yield. The findings have been published in the journal Advanced Materials.
Combining strengths
Where the plastic used is mainly a strong absorber of infrared light, the silicon converts light from the visible and ultraviolet spectrum. In this way the method combines the aforementioned advantages of plastics with the broad absorption property of silicon. For the science researchers themselves there was also a kind of ‘marriage’: two disciplines (plastic and silicon solar cells) joining forces where they would normally have worked fully independently of each other.
Curriculum Vitae
Alice Furlan (1987, Italy) studied Materials Engineering at the University of Trieste in Italy. As an Erasmus student she was able to study for a year at TU Delft and follow an internship at the Molecular Materials and Nanosystems group of prof.dr.ir. René Janssen at TU Eindhoven. In 2012 she began her PhD in this group.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.