Karl's Tech Talk: Green Legislation and the Impact on Electronic Materials and Processes


Reading time ( words)

In a previous Tech Talk, I pointed out that “green” and “environmentally friendly” are illdefined terms. In general, these terms refer to manufacturing that involves the replacement of toxic substances with less toxic materials, the elimination of materials or processing steps, less consumption of chemicals (i.e., more efficient or higher yield processing), reduction of water use, reduction of energy use, less space requirement (i.e., smaller equipment footprint), recycling, and on-site recovery of materials. The following list highlights critical regulations that impact electronic manufacturing. A. An overview of regulations that impact materials and processes used in the fabrication of electronic devices.

RoHS: The RoHS Directive stands for “the restriction of the use of certain hazardous substances in electrical and electronic equipment.” This directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants. Manufacturers need to understand the requirements of RoHS to ensure that their products, and their components, comply.

WEEE: Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE). This regulation addresses the disposal and recycling of electronic equipment.

REACH: Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18. December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)

Read the full article here.

 

Editor's Note: This article originally appeared in the March 2016 issue of The PCB Magazine.

Share

Print


Suggested Items

Isola’s Travis Kelly: Maintaining Continuity of Supply

04/13/2020 | Barry Matties, I-Connect007
On April 9, Barry Matties spoke with Travis Kelly, Isola president and CEO. Travis gave an update on Isola’s responses to the COVID-19 challenges in materials manufacturing. Travis pointed out that Isola’s products fill a critical need in the switch to medical equipment manufacturing for ventilators and related products. He also spoke to the three keys to maintaining continuity of supply.

IPC APEX EXPO 2020 Attendees Speak: Scott Pohlmann

03/05/2020 | I-Connect007 Editorial Team
"As a salesman, my job is to make sure I stay on the cutting edge of technology," said Scott Pohlmann of Milwaukee Electronics. "When our customers ask for certain features that they need on their equipment or performance, I need to know what the state-of-the-art equipment, profiles, and procedures are out there.

Gardien: Selling Test Equipment and Services

02/12/2020 | Real Time with...IPC
In this Real Time with... IPC interview, technology editor Pete Starkey speaks with Jason Posey, director of sales and service with Gardien. They discuss Gardien's range of flying probe testing and the introduction of AVI into the North American market.



Copyright © 2020 I-Connect007. All rights reserved.