IPC APEX EXPO: Gary Carter on First Board Manufactured With IPC-2581B


Reading time ( words)

Gary Carter, senior manager of CAD engineering for Fujitsu Network Communications, discusses the first board fabricated and assembled using IPC-2581B. This 20-layer board features 21,000 component pins and 15,000 holes, with controlled impedance on all layers. He also gave a presentation on IPC-2581B during the Design Forum.

To watch this interview, click here.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/15/2021 | Andy Shaughnessy, Design007 Magazine
Hard to believe that a year ago, I was getting ready to attend DesignCon and IPC APEX EXPO and wondering if this Novel Coronavirus was going to cut into attendance from the Pacific Rim. Now, we’re accustomed to virtual trade shows. They’re not ideal, but they’re the best we can do while meeting in person is not possible. We’ve learned to adapt.

TTM’s Approach to Stackup Design: Train the Customer

01/12/2021 | I-Connect007 Editorial Team
In this interview with the I-Connect007 Editorial Team, TTM’s Julie Ellis and Richard Dang drill down into stackup design, detailing some of the common stackup challenges that their customers face when designing for both prototype and volume levels, and offering advice to designers or engineers who are struggling with stackup issues. They also discuss why having too many different prepregs in a stackup can be asking for trouble, and how proper stackup design can optimize both the fabrication and assembly processes.

I-Connect Editor’s Choice: Five Must-Reads for the Week

12/31/2020 | Andy Shaughnessy, Design007 Magazine
We always hear that the PCB industry is “mature,” full of people past their prime who don’t know how to change with the times. I think 2020 puts the lie to that idea. I’m honored to be a journalist covering such an amazing group of people. In the words of U2, “I will begin again.” Happy New Year!



Copyright © 2021 I-Connect007. All rights reserved.