All About Flex: Why Copper is Ideal for Flexible Circuitry


Reading time ( words)

While copper may not rank the best in any one of the above criteria, it probably has the best overall rating.

Electrical Conductivity

The following chart[1] ranks the common metals by conductivity:

Flexible_Circuitry1.jpgCopper is the second-most conductive metal (in pure form). The copper used on flexible circuits can be formed by a number of methods such as electro-deposition (ED), rolling/annealing, or a combination of the two. The conductivity of copper by volume on a flexible circuit is not exactly the same as pure copper, but it is quite close.

Thermal Conductivity

Thermal conductivity is highly related to electrical conductivity. Thermal conducting properties are very important for a number of applications, particularly when heat dissipation is critical.

As can be seen from the chart above[2], copper is an excellent thermal conductor, relative to the other common metals.

Flexible_Circuitry2.jpgCost

Copper is one of the lowest cost metals that are viable for electronic applications. The following chart below shows typical costs by weight, and more importantly by volume.

Spot prices of metal costs can vary significantly from day to day. The costs above are based on one snapshot in time, but one can see that the relative differences are significant. The costs shown are based on spot prices and do not include the costs for processing the metals for electronic fabrication. Aluminum is very inexpensive relative to other metals, but copper is significantly cheaper than gold or silver.

Availability

Availability or abundance of supply tends to be inversely proportional to the cost. Copper is considered plentiful and is stated to have a 40-year supply based on reserves and 200 years based on resources.  The difference between reserve and resource is: Reserves are based on viable deposits that have been discovered and are either being mined or are deemed profitable to mine; Resources are based on potentially profitable discovered deposits and undiscovered deposits predicted by geological surveys[3]

Flexible_Circuitry3.jpg

Flexible_Circuitry4.jpgCorrosion Resistance

Corrosion resistance in any environment depends on the chemical exposure. The following chart[4] rates common metals by activity, which is an indicator of the likelihood of corrosion in the presence of moisture and ionic contamination.                                     

Copper is in the middle of the pack on the galvanic scale and is often treated, coated or plated to dramatically retard corrosion.

Flexible_Circuitry5.jpgFlexibility

An indicator of flexibility is the Young’s Modulus of Elasticity. This measurement relates to the amount of force it takes to change the elongation direction. The lower the number, the easier it will “stretch.” The chart below shows the Modulus numbers of the more common metals.

It is important to note that the flexibility of copper substrates used in circuit fabrication is highly related to the processing method used to create the foil. Rolled annealed copper goes through a series of rolling steps that elongates the grain, giving it a higher degree of flexibility. Even ED copper, which forms metal foil by electroplating copper onto a rotating stainless steel drum, is quite flexible and suitable for many flex-to-install applications. But the overwhelming favorite copper for flexible circuitry is rolled annealed. It is comparable in cost and offers the insurance of being the most robust with flexibility.

Another critical consideration is ease of processing. Copper is incredibly versatile and works well with a diverse set of circuit fabrication steps including electroplating, immersion and electroless plating, etching and soldering. While many of these processes have been designed around copper, this metal has remained the stand-alone workhorse for more than 50 years of printed circuit board processing.

References

1. www.metaldetectingworld.com.

2. www.tibtech.com

3. copperalliance.org

4. inspectapedia.com

Dave Becker is vice president of sales and marketing at All Flex Flexible Circuits LLC.

 

Share

Print


Suggested Items

ICT Autumn Seminar Review: Live in 2021!

12/07/2021 | Pete Starkey, I-Connect007
Faced with the choice between a real or virtual event, Bill Wilkie took a calculated risk. It has been many long months since members of the Institute of Circuit Technology had gathered together under one roof, but a fair-sized bunch of industry stalwarts braved the weather and the threat of COVID, descended on the Manor Hotel in Meriden, UK, on Nov. 30, and applauded Bill’s decision to go live. They were not disappointed; the program was superb, the atmosphere upbeat, and the networking opportunity priceless.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/16/2021 | Nolan Johnson, I-Connect007
I’m sure it’s just me being hyperaware, but I can’t shake it: Mars is where it’s at right now. Is it just me, or do you get the same feeling from the news? There are the Mars rovers—three generations of them still rolling, now—and a drone helicopter winding up for a maiden flight any day now. But that’s not all. There’s SpaceX’s StarShip, rapid-prototyping its way into a manned flight to Mars. And NASA’s whole “return to the Moon” project is simply a shakedown for the U.S. government contractors’ Mars flight hardware, too.

Finding Process Improvement Opportunities in Training

02/25/2021 | Nolan Johnson, PCB007
Nolan Johnson speaks with Leo Lambert of EPTAC about training the next generation out of high school and vocational schools, and how his company continues to improve processes, grow and adapt to changing requirements while fulfilling its mission to deliver technical certification training.



Copyright © 2022 I-Connect007. All rights reserved.