-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Orbotech’s Latest Technology at IPC APEX EXPO
May 2, 2016 | Barry Matties, I-Connect007Estimated reading time: 8 minutes
Orbotech presented their latest new technologies at IPC APEX EXPO 2016. The Nuvogo 1000 is a higher power version of their multi wavelength direct imaging machine, as well as their new automated optical shaping technology which can add copper deposition to an otherwise defective PCB. I met with Orbotech’s Micha Perlman in their booth on the show floor, to learn more.
Barry Matties: Micha, you are the senior marketing manager for the PCB division. I think that most people in our industry know Orbotech, but just for some context, tell us a little about the company.
Micha Perlman: Orbotech is a worldwide company focused on providing manufacturing equipment to the electronic industry. We have a wide variety of products, usually high-tech optical and digital products. We have been involved in the business of PCBs for many years as well as in the flat-panel display business, and lately we also entered into the advanced packaging market.
Matties: Your well-known AOI was kind of the starting point for Orbotech, right?
Perlman: Yes, but this was a long time ago. We are still the market leaders in AOI for PCBs and for flat-panel displays, but today that’s only a small part of our business. Many years ago, we moved to production machines and brought unique laser direct imaging to the PCB market, which we lead today as well.
We are also involved in other areas like the production of advanced packaging. We are proud to say that any electronic product that you hold in your hands today has more than one component which was manufactured using Orbotech solutions. It could range from the LCD or the touchscreen of your mobile phone to the PCBs or the components inside.
Matties: I've heard the revenue numbers for Orbotech and they're just incredibly large numbers. You guys really have a lot of resources to apply into R&D. It looks like you invest a lot back into R&D.
Perlman: That's right. We invest a high percentage of our revenue—typically about 13%—into R&D. This is a very high number for a capital solution business like ours that offers equipment for production.
Matties: What is the North American market like for Orbotech?
Perlman: It's a market that we have been leading for many years. It used to be our largest market, but then there was a shift to the Pacific and China. It is still a very important market for us where expensive, complicated and ‘one-off’ products are manufactured. We see a lot of military and aerospace applications that rely on Orbotech’s manufacturing expertise. I hear a lot of appreciation from the North American PCB manufacturers for what Orbotech’s solutions provide, how we enable them to meet the advanced technical requirements of PCB production here in America.
Matties: Well, direct imaging certainly makes a lot sense, especially here in America. There’s a lot more competition that has come into that arena. How has that impacted your strategies?
Perlman: At Orbotech, we never stand still. We are always looking at new ways to improve and stay ahead of the competition in terms of the quality, the speed and the performance of our products. Direct imaging is, as you say, very important for North America, and very important for the manufacturing of advanced smartphones in the Pacific. There is no way to manufacture a smartphone without having the direct imaging equipment, and it’s better to have Orbotech equipment because of its superior quality and lower total cost of ownership.
Matties: What sort of demands do your customers put on you, as far as the types of technology, the terms, or the requirements?
Perlman: We have very close relationships with our customers. We talk to them a lot, share our plans with them and they share their needs with us. When they are asked to develop tougher, more advanced PCBs they come to us to see how and if we can meet those needs. As our roadmap is defined well in advance, we are often ready with the solutions they need and we help them to ramp up their production of their increasingly complex products.
Matties: Here at the show, are you showing some new technology?
Perlman: Yes, definitely. There is one new product and one new technology that we are showing here. The Nuvogo™ 1000 is a new direct imaging machine that significantly enhances the power and the printing speed of the Nuvogo family that was introduced 18 months ago,
At the end of 2014, we introduced direct imaging technology with multi wavelengths that gives a much better imaging quality. For that, we moved from solid-state laser technology to laser diodes which enables the multi wavelength and the higher energy that give the DI better quality, better adhesion, better sidewalls and higher throughput.
Matties: How do the demands from a North American shop differ from the demands from a Chinese facility? Are there different requirements in terms of the relationship between you and your customers?
Perlman: There are fundamental differences in the business models between North America and China. In China, the focus is largely on high volume and low cost, both for simple and for very advanced products. Their business model is focused on pushing the production cost down—high speed, high efficiency and low cost of ownership.
Here in North America, the emphasis is more on advanced engineering to support low volume production of unique products. In the Pacific, it is not unusual to see an entire fab dedicated to one production line for a period of three or four months. In America, different and unique products are manufactured every day requiring a lot of engineering resources, experience, knowledge and advanced tools in order to deliver the required results.
Matties: Does that create a challenge for Orbotech, in terms of the technology itself?
Perlman: It does, but as a result of our vast experience and unique global view, we have comprehensive solutions. We have a wide range of products and solutions, and we have the flexibility to support different applications and different requirements. We also have very experienced engineers and field experts that enable our customers to get the most from our solutions, whether we’re talking about our high-capacity, high-quality, high-yield, advanced fab customers in the Pacific or the specific technological challenges of the American market.
Page 1 of 2
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.