FUTURECAR: New Era of Automotive Electronics - New Workshop by SEMI and Georgia Tech
June 17, 2016 | SEMIEstimated reading time: 2 minutes
SEMI and Georgia Tech have announced a new program, “FUTURECAR: New Era of Automotive Electronics Workshop” to take place on November 9-10 at Georgia Tech in Atlanta, Georgia. Addressing the fast changing intersection of automobiles and electronics, the workshop offers insight and collaboration on autonomous cars, electric vehicles, enabling high-bandwidth wireless communication, and components that can withstand high temperature and demanding emerging requirements.
Complex and new technical components and architectures are being introduced in automotive electronics ─ including autonomous vehicles for improved safety, sensing electronics, secure high-speed streaming communications and infotainment, and improved batteries for electric cars. As consumer demand continues to increase, automotive electronics will account for an increasing percentage of the value of the car, creating a multi-billion dollar market within a decade.
Workshop sessions include:
- Autonomous driving: Cameras, radar and lidar (light detection and ranging)
- Electric Cars: Co-design and fabrication of Gallium Nitride (GaN) and System in Chip (SiC) devices and packages for high power
- Computing and communications: High-bandwidth wireless (5G), digital (2.5D / 3D) and photonic Si and glass technologies
- High-temperature and high-reliability: substrates, components, interconnections, encapsulants and reliability mechanisms
- Cross supply-chain collaborative platforms to assess technology options and business risks
- Complete value-chain enablement and development of standards and roadmaps
The workshop will focus on what is needed in technologies, and technology ecosystem stewardship, to enable swift and cost-efficient commercialization. The FUTURECAR workshop draws on the synergy between Georgia Tech in R&D along with its industrial partners, and SEMI in global electronics manufacturing stewardship across the supply-chain. Key to the depth of the program is support from co-sponsors International Electronics Manufacturing Initiative (iNEMI) in roadmaps, and International Electrical and Electronics Engineers Components, Packaging and Manufacturing Technology (IEEE CPMT) and International Microelectronics Assembly and Packaging (IMAPS) as global electronics societies.
Workshop co-chairs are Rao Tummala, Georgia Tech; Pushkar Apte, SEMI; Bill Bader, iNEMI; and Urmi Ray, Qualcomm and IMAPS.
Visit the FUTURECAR event page here for more details.
About SEMI
SEMI® connects more than 2,000 member companies and more than a quarter-million professionals worldwide to advance the science and business of electronics manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, and services that enable smarter, faster, more powerful, and more affordable electronic products. Since 1970, SEMI has built connections that have helped our members grow more profitably, create new markets, and address common industry challenges together. SEMI maintains offices in Bangalore, Beijing, Berlin, Brussels, Grenoble, Hsinchu, Moscow, San Jose, Seoul, Shanghai, Singapore, Tokyo, and Washington, D.C.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.