Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- Printed Electronics
- New Products
- Test & Inspection
- Fabrication Process
- IPC Standards
- From The Show
Decreasing Bend Radius and Improving Reliability—Part I
10/11/2019 | Kelsey Smith, All Flex
SMTA Additive Electronics Conference: Industry Trends
10/10/2019 | I-Connect007
Meet Dana Korf, I-Connect007 Columnist
09/20/2019 | I-Connect007
Additive Electronics Conference Set for October 2019
09/18/2019 | I-Connect007 Editorial Team
Weaving Advocacy into E-Textiles
09/18/2019 | Kelly Scanlon, director, EHS policy and research
Future of 'Substances and Materials in Products' Data Exchange Formats as Standards
This article provides a simplified, state-of-the-art description of the data exchange formats for standards covering substances and materials reporting in products and processes. It also reviews existing issues and new challenges shared with end users of the standards and companies represented by their trade associations with some solution proposals they could discuss.
Additive Electronics Conference Set for October 2019 Debut
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it's an important event for people to attend—especially those involved in the design process.
Chuck Bauer: SMTAI 2019 Founder's Award Recipient
At the recent SMTAI conference and exhibition, Chuck Bauer, Ph.D., senior managing director at TechLead Corporation, received the Founder's Award, a prestigious award given to a member who has made exceptional contributions to the industry and provided ongoing support and service to the SMTA.
Decreasing Bend Radius and Improving Reliability—Part I
Many of the issues that arise when using a flex circuit come from a lack of knowledge about how to properly design one, especially when the circuit is required to bend.
Communication, Part 2: Design Data Packages
The first part of this six-part series highlighted ways that PCB fabricators and designers can better communicate, starting with how to qualify a board shop. In Part 2, Bob Chandler and Mark Thompson talk about the importance of preparing, sending, and receiving comprehensive (and ideally, perfectly complete) design data packages.
SMTA Additive Electronics Conference: Industry Trends
Mainstream PCB manufacturing is often limited to 50-75 microns (mm) line and space. But the electronics industry is evolving quickly. Propelled by the demand for more sophisticated electronics, PCB design is being tasked with finer lines, thinner materials, and smaller via sizes.
New High-speed 3D Surface Imaging Technology in Electronics Manufacturing Applications
Line confocal sensors—and scanners based on them—are used in the imaging of surfaces, transparent materials, and multi-layered structures in various metrology and inspection applications on discrete parts, assemblies, webs, and other continuous products. Line confocal sensors operate at high speed and can be used to scan fast-moving surfaces in real-time as well as stationary product samples in the laboratory.
Standards: Why We Have Them and Live by Them
Have you ever designed a board but received feedback that it couldn’t be manufactured unless changes were made? Or maybe you’ve designed a complex board and sent it to the factory only to find out that the manufacturer didn’t build the board to your expectations? PCBs are becoming more complex, factory options are growing, and expectations for product life cycles are becoming longer.
Communication, Part 1: How to Qualify a Board Shop
In Part 1 of this six-part series for "Fab Fridays," Mark Thompson, CID+, engineering support at Prototron, and CA Design CTO Bob Chandler discuss ways that PCB fabricators and designers can better communicate, starting with how to qualify a board shop.
The Institute of Circuit Technology Autumn Seminar
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.
Insertion Loss Performance Differences Due to Plated Finish and Circuit Structure
Data will be presented for loss versus frequency for six different plated finishes commonly used in the PCB industry, and opinions will be offered as to why the loss behavior differs for the different plated finishes and for the different circuit configurations. Because the insertion loss of high-frequency circuits also depends on substrate thickness, circuits fabricated on substrates with different thicknesses will be evaluated to analyze the effects of substrate thickness on insertion loss.
Is It Time to Shake Up Materials Standards?
COO Mark Goodwin and Technology Ambassador Alun Morgan from Ventec International Group describes how they feel current standards do not sufficiently recognize the needs of end customers today with new processes and materials being shoehorned into old standards based on dated ideas of classifications, and how this makes choosing the right material challenging for designers.
SMTAI 2019: George Milad's SMTAI Paper and the IPC ENIG Specification Revision
George Milad, national accounts manager for technology at Uyemura, discusses his paper on changing processes to eliminate nickel corrosion that he presented at SMTAI. He also tells Nolan Johnson about the IPC ENIG specification revision. George is involved in the Revision B acceptance process and shared information on how to get involved with the specification committee as well.
Carrying the Flag
The September 2019 issue of PCB007 Magazine concludes our month-long look at industry standards. We wrap up by "waving the standard" in celebration. Of course, that phrase immediately piques the interest of us wordsmiths. Why, after all, do English speakers use "standard" as a synonym for a flag?
Meet Dana Korf, I-Connect007 Columnist
Meet Dana Korf, one of our newest I-Connect007 columnists! Dana’s columns will focus on IPC-2581 as well as PCB front-end tooling, data quality, DFM processes, etc.
Additive Electronics Conference Set for October 2019
Tara Dunn, president of Omni PCB and I-Connect007 columnist, and Lenora Clark, director of autonomous driving and safety technology at MacDermid Alpha Automotive, discuss what can be expected from the upcoming Additive Electronics Conference in San Jose, California, the impetus and motivation behind the conference, and who can benefit the most from attending.
Weaving Advocacy into E-Textiles
Electronic textiles (e-textiles) – fabrics that have electronics embedded in them to achieve certain functions – are of growing interest in the electronics manufacturing industry, and thus they are of growing interest to the IPC Government Relations team as well.
The Use of Insoluble Anodes in Acid Copper Plating
Soluble anodes have been the staple of the industry for decades, but they require extensive maintenance and generate waste in both copper metal and electrolyte. As plated copper thickness uniformity requirements become more stringent, more and more time will be needed for anode maintenance to ensure the uniformity of the anodic setup.
Robert Feranec: A Lifetime of PCB Design
Robert Feranec, a popular YouTuber and founder of the FEDEVEL Academy, discusses with Andy Shaughnessy the upcoming keynote he’ll be giving at AltiumLive in San Diego, California, and how he's helping people around the world understand and optimize their PCB design processes.
EIPC Summer Conference 2019, Day 2
In this article, EIPC Chairman Alun Morgan provides the highlights of the second day of the EIPC 2019 Summer Conference, which was held in the beautiful city of Leoben in central Austria. He also talks about key points of the numerous technical presentation at the conference.
EIPC Summer Conference 2019, Day 1
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.
NCAB 2019 Market Report: Competition Is Heating Up
Chris Nuttall, chief operations officer and VP of technology of NCAB Group, talks about the company's most recently released market report. Nolan Johnson and Nuttall discuss some of the market drivers and conditions the industry can expect to close out in 2019 as well as what to prepare for in 2020.
Selecting the Proper Flex Coverlayer Material
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.
Chemcut: Wet Processing Equipment for the Long Haul
Chemcut CEO and General Manager Rick Lies speaks about the growth he has seen in the marketplace over his 18 years in the industry, and how Chemcut has been able to remain competitive in the PCB and photochemical milling spaces. Jerry Reitz, Chemcut’s HES manager, also addresses the current shift towards zero-discharge facilities.
Putting Green Into a Brownfield Facility
George Milad, national accounts manager for technology at Uyemura, talks about what is driving change in the wet process marketplace and how chemistries must fit into next-generation product design while also meeting new environmental requirements.
The Advantages of Non-sludge Acid Copper Products
Mike Wood, technical director with Cerambus Asia Pacific, discusses the acid copper product from Cerambus Technology Inc. that doesn't generate sludge during the plating process and operates at higher production output by using higher current density. He talks about why this is important for the state of the vertical continuous plating (VCP) market in Asia, and the trends he’s seeing in that space.
The State of Plating
Increasingly, PCB design technology utilises buried and blind via holes and plated via fill is also becoming more and more common. The buried and blind holes mean that the loading on the plating equipment is multiplied by the number of different inner layer connections. The same technology means that equipment needs to deal with thinner and thinner materials.
Meet Mike Hill, I-Connect007 Columnist
Mike Hill has been in the PWB fabrication industry for over 40 years. Throughout his career, he has been a member of IPC and participated in specification writing for both IPC and the military. Within IPC, he has received the President's Award, General Chairmanship, Committee Chairmanship, and many other recognitions. In his columns, Mike will help you better understand the requirements and how-to's for MIL-PRF-31032 certification for PWB fabrication.
Pollution Prevention Techniques: Rinse Water Reduction
There are five general categories of common techniques for pollution prevention in a PCB fabrication facility: new processes to replace sources of pollution; extend the bath’s life; rinse water reduction; dragout reduction; and ventilation reduction. While this list is not all-inclusive, it provides an overview of the types of technologies used around the world that are important to consider. This article, examines rinse water reduction.
SAP Utilizing Very Uniform Ultrathin Copper
The demand for miniaturization and higher density electronic products has continued steadily for years, and this trend is expected to continue, according to various semiconductor technology and applications roadmaps. The semiconductor miniaturization brings significant economic and technical benefits and the semiconductor scale factor becomes the master for the associated package and PCB design.
Innovative Electroplating Processes for IC Substrates
The decreasing chip scales and smaller line/spacing distances have created unique challenges for both the PCB industry and the semiconductor industry. This paper discusses innovative additive packages for direct-current copper electroplating specifically for IC substrates, which offer better trace profile and deliver via fill and through-hole plating. It also describes two electrolytic copper plating processes, the selection of which could be based on the via size and the dimple requirements of the application.
Vertical Conductive Structures, Part 3: Design Tool Techniques
New vertical conductive structure (VeCS) technology can reduce layer count and improve signal integrity without the need for sequential technologies. VeCS is different than traditional through-hole vias, microvias, and ELIC designs, which are more expensive and require a high number of laminations, drilling, and plating cycles to build up a reasonable number of layers.
Nano Dimension Details New DragonFly LDM
Dan Feinberg talks with Nano Dimension CEO Amit Dror about the new DragonFly LDM 3D printer technology announced by the Israeli company on July 24, 2019, aimed at increasing machine uptime and moving forward from prototyping to higher production volumes.
Solder Mask Curing: UV Bump Overview
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.
There’s An Art to Plating
There's definitely an art to plating. Start with a generally planar substrate, then alternately put stuff on and take things off. Continue this in subtle variations until what you have is the stuff you want, where you want.
Meet Chris Mitchell, I-Connect007 Columnist
Chris Mitchell is vice president for global government affairs at IPC—Association Connecting Electronics Industries—where he is responsible for development and implementation of the organization’s global advocacy efforts and public policy agenda with a focus on electronics industry business improvement, environment, health and safety, and defense initiatives.
How to Feed Test Data Back to Engineering for Process Improvement
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.
Crowded Congressional Calendar Affects Industry Priorities
More than five months remain in 2019, but U.S. congressional leaders are already running out of time as they face a long list of must-pass bills before year’s end. Although some of these bills do not affect the electronics industry, some of them do, and the overall agenda does affect the opportunities and risks we face.
A Guide to High-reliability PCBs from Design to Specification
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.
A Conversation with Karen McConnell—An Emerging Engineer Program Mentor
IPC’s Emerging Engineer program, launched in 2016, provides early career professionals an opportunity to learn from dedicated industry volunteers who participate in IPC standards development. IPC’s editorial staff had the opportunity to talk with one of those dedicated volunteers, mentor Karen McConnell, Senior Staff Engineer CAD CAM, Northrop Grumman, about why she participates as a mentor in IPC’s Emerging Engineer program.
How Changing Cleaning Technologies Affect Reliability
At the recent IPC High-Reliability Forum and Microvia Summit, Andy Shaughnessy spoke with Michael Konrad, founder and president of Aqueous Technologies and a speaker and panelist at the event in Baltimore, Maryland. They discussed Konrad’s presentation and the recent proliferation of cleaning, from solely high-reliability products to Class 1 consumer products.
Nano Dimension CEO Gives Company Update
Dan Feinberg and Nolan Johnson speak with Amit Dror, CEO of Nano Dimension, about recent company events and the company’s focus on high-mix/low-volume and agile local manufacturing.
EPA, Industry Come Together in Visit to TTM Facility
IPC member TTM Technologies is proud to show off the new wastewater-treatment system at its Sterling, Virginia plant, which is helping to enhance the company’s pollution prevention and resource recovery performance.
Microvias: Links of Faith are Not Created Equally
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.
Reliability... It All Comes Down to the Landing
Our industry is embarking on a new age of technical development to achieve much higher levels of overall reliability that will be required of the devices we fabricate. Whether in medical devices, autonomous vehicles, or in IoT, reliability will be crucial to both our success and safety.
Dissecting the IPC Regional Survey on PCB Technology Trends
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.
An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards
Multilayer organic laminates, which make up over 90% of the interconnecting substrates in electronics (standard FR-4 represents 85% of the substrates used for laminates), can develop a loss of electrical insulation resistance between two biased conductors due to conductive filament formation.
Identifying Product Board Class and Pre-quote Software
Deciding on the class of the final product will determine what files are needed for fabrication and assembly. It is critical to note that for a product to be built to any class level, it must be designed to that class level from its inception.
Conventional Exposing: Direct Imaging Solder Mask
When you compare direct imaging of solder mask with contact exposure of solder mask, the positive aspects and the advantages are clear. Without a doubt, direct imaging shortens the throughput time and eliminates artwork production. It also eliminates the costly measurement of the panels and manufacturing of artwork with different scaling factors.
Kelvin Characterization to Accurately Predict Copper Thickness
A few years ago at Integrated Test Corporation, we found that the reaction plan for void fallout at electrical test was ineffective and not standardized. Like many PCB manufacturing facilities (including a Sanmina shop that I used to work at), the reaction plan consisted of cross section analysis to determine the void type.
Virtual Verification Station From CIMS Enhances AOI Capabilities
At this year’s CPCA Show, CIMS Marketing and Technical Director Vladi Kaplan spoke to Barry Matties about a number of add-ons CIMS designed to further enhance their AOI capabilities and systems. He described their Virtual Verification Station (VVS), CIMS Quality Center (CQC), and Software Development Kit (SDK) as well as trends he sees with laser via inspection.
Technically Appropriate Material Choices Are Key to Success
Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. Editor Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.
Emma Hudson: From Tomboy to Tech Lead
In this interview, Emma Hudson, CTO of Gen3, and Gayle Paterson, founder of Female Leaders in Tech, Everywhere (FLITE), discuss careers and the electronics industry.
Insulectro’s OEM Program: Time to ACT!
Ken Parent, Insulectro VP of sales and product management, discusses the current dynamics in the materials marketplace and how Insulectro is developing educational resources to help design teams and fabricators better understand the capabilities and features for the emerging laminate materials.
AWE 2019: Go XR, Be Awesome
Dan Feinberg attended and covered the recent 2019 Augmented World Expo (AWE) and conference in Santa Clara, California. The event featured the latest developments and technologies in augmented (AR), mixed (MR), virtual (VR), and extended virtual reality (many just call it all XR to make it simple). Here's a wrap-up of the event.
Microtek Labs: Providing Trusted Testing in the Chinese Market
On a recent visit to Microtek Laboratories' Changzhou facility, Barry Matties, publisher, and Edy Yu from the I-Connect007 China team spoke with chairman and CTO Bob Neves about the changes he has seen living and doing business in China over the past 15 years, and the increased importance of standards and testing as China moves into manufacturing more high-reliability products.
Digital Twin Drives Design in the Smart Factory
New product realization and design for manufacturing and assembly has now started to become more visible as a program that can improve a company’s time to market and lower product costs. This is one of the main focuses of Industry 4.0 for the smart factory. Many programs are underway by numerous companies, and what is now needed is a framework to coordinate the application of these programs.
Photonics Systems Looks to Expand Its PCB Capabilities
Pulsed-laser equipment manufacturer Photonics Systems looks to expand its capabilities to the PCB industry. Barry Matties sat down with Antonio Schmidt and Kurt Weber to talk about the company’s transition and the challenges they’ve faced thus far as they continue to build and extend their brand into a new market segment.
Quality by Design
The design team’s files and the accompanying documentation is the real-world implementation plan to turn the OEM’s concepts and marketing research into a viable, physical, competitive product. Unless manufacturing defies the build instructions from the designers, the product will only be as manufacturable as the design files themselves.
ICT 45th Annual Symposium Review
The Institute of Circuit Technology (ICT) held its 45th annual symposium on June 4, 2019 in Dudley at the Black Country Museum—a symbol of the spirit of innovation in engineering technology and the entrepreneurial and manufacturing skills that had established that region’s supremacy in leading the original Industrial Revolution. Here's a recap of the events and presentations at the symposium.
IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.
DuPont on Materials Challenges and New Opportunities
John Andresakis, senior marketing technologist in the Interconnect Solutions (ICS) Group of DuPont, and Jonathan Weldon, RF applications engineer also in ICS at DuPont, spoke with the I-Connect007 editorial team about trends the company is seeing, what challenges their customers are facing with materials today, and future opportunities with new technologies, including 5G, electric cars, IoT, and more.
Creating Stability in Materials Chaos
Nolan Johnson and Tony Senese—manager, business development group, Panasonic EMBD—discuss the evolution of the materials marketplace over the years from a time when the market aligned for the rise of Panasonic’s MEGTRON 6 to the ever-changing materials industry of today. With the ramp-up to 5G and everyone pushing product development, Tony describes a chaotic materials market flooded with new companies and materials.
PCB Fabricators’ Tech Capabilities Exceed OEMs’ Needs in Many Areas
Some interesting differences showed up in the board property data reported by the OEMs and PCB fabricators that participated in IPC’s PCB Technology Trends 2018 study.
Laminate Suppliers Face Increasing Demands From Customers
As a global laminate supplier with a large product offering, TUC is at the forefront of the growing customer demands that stem from a number of market segments pushing next-generation products. In an interview with Nolan Johnson, TUC North American President Alan Cochrane talks about the company’s shift toward trending areas and how strategies like the adoption of thinner glass styles have helped make it all possible.
Orbotech Celebrates Success of Orbotech Diamond and Discusses Future Trends
At the recent CPCA Show in Shanghai, Orbotech celebrated having over 100 of their Orbotech Diamond™ direct imaging machines in the marketplace. Barry Matties caught up with Meny Gantz—VP of marketing for Orbotech’s PCB division—to talk about the drivers behind the success of Orbotech Diamond systems before turning the conversation toward the future and Industry 4.0.
IMPACT Washington, D.C. 2019 Recap: Leaders Call for Action on USMCA Trade Deal
Top executives from electronics companies across the United States were in Washington, D.C., last week to call on the Trump administration and Congress to support policies that will drive the electronics industry’s future growth in North America and worldwide.
Isola on Adapting Processes to Meet Customer Needs
In an interview with I-Connect007, Sean Mirshafiei, chief sales and marketing officer for Isola, discusses the company’s perspective on material market trends and how they are adapting product development processes to respond to new customer needs.
Electrolytic Plating: Filling Vias and Through-holes
The continuously evolving electronics industry environment is causing the development of various electrolytic copper processes for different applications over the past several decades. This article describes the reasons for development and a roadmap of dimensions for copper-filled through-holes, microvias, and other copper-plated structures on PCBs.
FlexFactor Program Informs, Inspires, Attracts, and Recruits Talent
Barry Matties and Nolan Johnson speak with Brynt Parmeter, Emily McGrath, Clarence Chi, and Mikayla Ridi about the NextFlex program FlexFactor. This initiative aims to help high school and college students see potential futures in the advanced manufacturing sector and combat common misperceptions young people might have about modern-day manufacturing.
Are Regional Differences in PCB Technology as Great as We Think?
We keep hearing that Asia is all consumer and automotive electronics and North America and Europe are all high reliability/long life. The findings in IPC’s PCB Technology Trends 2018 study show that these regions are not as different as expected, and the differences we do see are interesting.
Barbara Bracken Discusses ICAPE's New Facility
During the recent SMTA Atlanta show, Andy Shaughnessy sat down for an interview with Barbara Bracken, sales manager for Texas for the ICAPE Group. Barbara explained why ICAPE is much more than a PCB broker; the company now owns its own assembly facility in the U.S. and can assembly boards in the U.S. or China.
Growing Opportunities with 3D Printed Electronics
Dr. Kurt Christenson, senior scientist at Optomec, discusses the company’s Aerosol Jet technology, which eliminates the need for wire bonding by printing interconnects on 3D surfaces. Christenson also explores the current state of the technology and highlights the market segments and applications with the most to benefit from being able 3D print electronic components, such as resistors, capacitors, antennas, and transistors.
DuPont on New Beginnings and Empowering the Industry
Andy Kannurpatti gives the I-Connect007 team an overview of the latest news from DuPont Electronics and Imaging, including investments toward the new production assets in Ohio, Silicon Valley Technology Center, and other facilities. He also details how the company is engaging OEMs and PCB fabricators and design teams, as well as some exciting business updates coming this spring and summer.
Making Materials Succeed: Past, Present, and Future Trends
Tony Senese, manager for the business development group at Panasonic EMBD, gives Nolan Johnson an overview of materials and components as well as changing business models and methods to make materials succeed and how to stay profitable.
Press Release Tips
Copyright © 2019 I-Connect007. All rights reserved.