Rogers Corporation to Present & Exhibit at IMS in Atlanta
May 18, 2021 | Rogers CorporationEstimated reading time: 2 minutes
Rogers Corporation announced that Technical Marketing Manager, John Coonrod, will present Thermal Management for High Frequency Printed Circuit Boards from 11:45 – 12:00 p.m. on Tue., June 8 and Stripline Circuitry for Millimeter-Wave and Very High Speed Digital from 11:15 – 11:30 p.m. on Wed., June 9 in the MicroApps Theater at the International Microwave Symposium (IMS) in Atlanta.
In addition, Rogers will be showcasing its latest 5G and autonomous vehicle materials and other products in Booth #1621 during IMS, the world’s largest RF and Microwave show, which takes place from Tues. June 8 – Wed., June 9. These products include XtremeSpeed™ RO1200™ laminates and bondplies, RT/duroid® 6035HTC laminates, as well as recently launched SpeedWave™ 300P ultra-low loss prepreg.
XtremeSpeed RO1200 circuit materials are engineered to meet the unique electrical and thermal/mechanical demands of high speed designs. These circuit materials enable system designers the flexibility to design leading edge systems that maximize data throughput and minimize latency in performance demanding applications. With a low dielectric constant of 3.05, and a maximum dissipation factor of 0.0017 @10GHz, XtremeSpeed RO1200 materials provide outstanding signal integrity, reduced signal skew, and reduced cross-talk. Combined with superior thermal/mechanical performance, low CTE, and a halogen free UL 94 V-0 rating, these materials are well suited for the most demanding high layer count applications.
RT/duroid 6035HTC laminates feature a relative dielectric constant of 3.5 at 10 GHz, making them suitable for a wide range of circuits, including amplifiers, couplers, filters, and power combiners/dividers employed in avionic and other military and hi-reliability systems. The laminates incorporate a unique filler material to achieve superior heat-transfer characteristics compared to other high frequency circuit materials with similar dielectric constant. With outstanding thermal conductivity of 1.44 W/m?K as well as low loss, with a loss tangent of 0.0013 at 10 GHz, for excellent high frequency performance, this combination of high thermal conductivity and low dielectric loss translates into improved amplifier performance.
SpeedWave 300P prepreg provides excellent thermal reliability for the most demanding high layer count designs requiring multiple sequential laminations. It also delivers superior fill and flow capability around heavy copper features, a low z-axis expansion for plated through-hole reliability and is CAF resistant. This UL 94 V-0 rated material is compatible with modified FR-4 fabrication processes and lead-free PCB assembly processing and is ideal for 5G mmWave, high resolution 77 GHz automotive radar, aerospace & defense and high speed digital designs.
About Rogers Corporation
Rogers Corporation (NYSE:ROG) is a global leader in engineered materials to power, protect and connect our world. Rogers delivers innovative solutions to help our customers solve their toughest material challenges. Rogers’ advanced electronic and elastomeric materials are used in applications for EV/HEV, automotive safety and radar systems, mobile devices, renewable energy, wireless infrastructure, energy-efficient motor drives, industrial equipment and more. Headquartered in Chandler, Arizona, Rogers operates manufacturing facilities in the United States, Asia and Europe, with sales offices worldwide.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.