Designing Electronics for High Thermal Loads
April 16, 2024 | Akber Roy, Rush PCB Inc.Estimated reading time: 2 minutes
Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
Thermal Management: A Pinnacle Challenge to Reliability
All electronics generate heat due to energy conduction inefficiencies. This phenomenon arises from inherent electrical resistance in all metals and semiconductors, leading to some energy in the circuit converting to heat. Over time, that heat, if not properly managed, can accumulate and cause damage to sensitive components.
In my capacity, I’ve witnessed an increase in thermal management issues as electronics trend toward higher functionality in smaller packages. Although many thermal management methods and copious amounts of component thermal data are available to assist engineers in understanding thermal loads, thermal issues continue to be difficult to predict, creating unwanted surprises. Unfortunately, these surprises often arise during functional testing, not during the front-end design process. I firmly believe that today’s compact, high-performance electronics must be developed with robust thermal management strategies early in the design cycle. This proactive approach not only reduces development time and costs but also helps product designers ensure that crucial electronic components operate in their optimal temperature range, ultimately enabling long-term product safety and reliably.
To help designers achieve these goals, I’ve developed the following overview of best practices and key considerations for managing heat in electronic systems.
Understand the Factors Affecting Thermal Load
Many factors contribute to the overall thermal load in electronic systems, from power consumption and I/O speeds to component package designs, features, and functions. Drawing on decades of experience supporting PCB fabrication and assembly, it becomes apparent that advanced and simple systems alike can grapple with thermal issues, and there is no one-size-fits-all thermal solution.
I strongly recommend using thermal modeling and simulation tools at the beginning of the design process to aid in understanding the many factors that affect thermal load, identify potential hot spots, and assess the potential effects of different thermal management strategies. This approach makes it possible to accurately predict thermal behavior in complex electronic systems prior to building physical prototypes. With thermal modeling, designers can efficiently optimize their designs, simulating and analyzing multiple design iterations, while experimenting with different components and materials.
To read this entire article, which appeared in the March 2024 issue of Design007 Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
epoxySet Unveils UC-2210M - Urethane for Electronic Component Protection
04/29/2024 | epoxySetepoxySet introduces a new and unique, urethane potting compound. The UC-2210M was formulated to protect electronic components in high moisture and thermal environments including constant atmospheric exposure, oceanographic environments and high humidity conditions.
epoxySet Introduces EO-20E – Versatile, Electrically Conductive Epoxy
04/29/2024 | epoxySetepoxySet produces EPOXIOHM EO-20E an industry established, reliable electrically conductive epoxy designed for solder replacement, chip bonding and other intricate electronic and optoelectronic assemblies. This creamy paste has a an easy to use 1:1 mix ratio with a 48 hour work time.
Adura Solutions Exhibits at Del Mar 2024
04/24/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year’s Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.