-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Chuck Bauer Discusses the Future of Packaging
September 5, 2018 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
When we decided to cover the future of PCB packaging, we knew we would have to interview Charles Bauer, Ph.D., owner of TechLead Corporation. For over 35 years, Chuck has been a pioneer in electronics packaging, from 3D and system-in-package to multichip modules and nano technology. He’s a frequent speaker at events like SMTA International, ICEP Japan and ESTC in Europe. He also founded the Pan Pacific Microelectronics Symposium.
Chuck recently spoke with Happy Holden, Andy Shaughnessy and Barry Matties about current trends in packaging, the need for product designers and manufacturers to communicate, and why no matter how cool the technology is, cost is still king.
Happy Holden: Chuck, some of the big trends are 3D packaging and wafer-level packaging. Wafer-level packaging is of interest to a lot of our readers because the organic package substrate is a leading edge for circuit board technology. With this wafer-level packaging push, it wants to be finer and finer pitch. What does that do to the assembly, Chuck?
Bauer: First, I think that wafer-level packaging is really a misnomer because wafer-level packaging isn't really being done so much at the wafer level anymore. There's fan-in, wafer-level packaging, which is indeed a wafer-level packaging approach. That's relatively limited today, and I think that some of the barriers in terms of interfacing with circuit boards are going to inhibit that technology. It doesn't mean it can't be done or won’t be done; it just means it's going to be inhibited in terms of pin-count because their pitch is going to be constrained by the next level of interconnection.
There are countervailing trends in the assembly side of the industry, where we're seeing a lot more activity going on in the area of nano assembly. For example, about four years ago we did a project that had a wafer-to-wafer connection. We used a nano silver technology to join a CMOS pre-amplifier chip directly to an indium phosphide avalanche photo diode. We were connecting those two chips to each other, and we were doing it on a 32-micron pitch with 6-micron pillars. Today, they're down to about 22-micron pitch, and the goal is to get it to 15-micron pitch.
IBM Zurich has been very active in using nano copper as the bonding medium to assemble fine-pitch packages down to about 40-micron pitch onto printed circuit boards. I think that there will necessarily be materials development that will allow us to achieve those finer pitches. How fine a pitch we have to go to is a different question. As we go to too fine a pitch, what happens to the printed circuit board? I do think that, especially in the kinds of products that are going to use these super fine pitch devices, you're starting to see a trend toward more and more flex and flex rigid type structures.
The one area where those packages are going to be a big player is in areas such as IoT. No other markets are big enough to justify processing of devices at a panel level like that, because most of the technologies that we use, and most of the designs that we use, just don't use enough volume to justify putting together a panel processing line, when you look at the capacity.
To read this entire interview, which appeared in the August 2018 issue of Design007 Magazine, click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: