Physicists Make One Step Toward Using Insulating Antiferromagnetic Materials in Future Computers
October 25, 2019 | JGUEstimated reading time: 2 minutes
Future computer technology based on insulating antiferromagnets is progressing. Electrically insulating antiferromagnets such as iron oxide and nickel oxide consist of microscopic magnets with opposite orientations. Researchers see them as promising materials replacing current silicon components in computers. Physicists at Johannes Gutenberg University Mainz (JGU) in collaboration with Tohoku University in Sendai in Japan, the synchrotron sources BESSY-II at Helmholtz-Zentrum Berlin (HZB), and Diamond Light Source, the UK's national synchrotron, have demonstrated how information can be written and read electrically in insulating antiferromagnetic materials.
By correlating the change in the magnetic structure, observed with synchrotron-based imaging, to the electrical measurements performed at JGU, it was possible to identify the writing mechanisms. This discovery opens the way toward applications ranging from ultra-fast logic to credit cards that cannot be erased by external magnetic fields – thanks to the superior properties of antiferromagnets over ferromagnets. The research has been published in Physical Review Letters.
Antiferromagnetic materials, interesting and not useless
Antiferromagnetic materials potentially allow for memory elements much faster and with higher storage capacity than what it is available now with conventional electronics. However, these materials are very difficult to control and detect, which makes the writing and reading operations in devices challenging. In his 1970 Nobel Prize speech, Louis Néel described antiferromagnetic materials as interesting but useless. It was believed that one can manipulate these materials only by very strong magnetic fields, which cannot be generated easily and require, for example, the use of superconducting magnets. The situation has changed drastically in the last few years, with reports showing that it is possible to control antiferromagnetic materials including even insulators efficiently by electrical currents.
International collaboration studying the advantages of spintronics with antiferromagnets over conventional electronics
"We know that we are going to reach soon the limits of conventional electronics based on silicon, due to the continuous technological improvement. That is the main reason driving research in spintronics, which aims to exploit not only the charge of the electrons but also the spin degree of freedom, doubling the information carried and computed", said Dr. Lorenzo Baldrati, Marie Skłodowska-Curie Fellow at Mainz University and first author of the paper.
"Our research shows that antiferromagnetic insulator materials can be written efficiently and read electrically, which is a key step in view of applications." Lorenzo Baldrati works in the laboratory headed by Professor Mathias Kläui. "I am very happy to see our fruitful collaboration with our colleagues in Japan and groups in Mainz leading to another joint publication. With the support of the German Academic Exchange Service (DAAD), the Graduate School of Excellence Materials Science in Mainz (MAINZ) and the German Research Foundation (DFG), we were able to initiate a lively exchange between Mainz and Sendai and with various other theory groups."
Professor Olena Gomonay of the JGU-based group of Professor Jairo Sinova developed the theory. "I enjoyed the joint work the experimental colleagues in Mainz. It was exciting to see how theory and experiment help each other to discover new physical mechanisms and phenomena", said Golomay. "Through our work focused on only one particular system, it can be considered as a proof-of-principle for the family of antiferromagnetic insulators. We hope that the deep understanding of antiferromagnetic dynamics, which we achieved during this project, will push forward the exciting field of antiferromagnetic spintronics and will be a starting point for new joint projects from our groups."
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.