The Quantum Internet is Within Reach
October 25, 2019 | TUMEstimated reading time: 3 minutes
An international team headed by physicists from the Technical University of Munich (TUM) has, for the first time ever, experimentally implemented secure quantum communication in the microwave band in a local quantum network. The new architecture represents a crucial step on the road to distributed quantum computing.
As of yet, there are no universal quantum computers in the world. But for the first time, an international team led by TUM physicists Rudolf Gross, Frank Deppe, and Kirill Fedorov has successfully implemented secure quantum communication in a local network – via a 35-centimeter superconducting cable.
"We have thus laid the foundation for implementing quantum communication systems in the very important microwave range," says Rudolf Gross, professor of technical physics at the Technical University of Munich and director of the Walther Meißner Institute (WMI), where the experiments took place. "This is a milestone. This puts the quantum internet, based on superconducting circuits and microwave communications, within arm’s reach."
First author Stefan Pogorzalek (r) and co-author Dr. Frank Deppe with the cryostat, in which they have realized a quantum LAN for the first time. Image: A. Battenberg / TUM
Years of Pioneering Work
Researchers at WMI have been pioneering the propagation of quantum microwaves for more than a decade. First, they had to prove that microwave radiation even has quantum mechanical properties. Unlike with visible light, this was extremely challenging from a technical point of view, due to the low energy of the microwave photons.
To eliminate interferences, the experiments were done at temperatures near absolute zero. Using special cooling devices, the physicists ultimately succeeded in demonstrating the principle of entanglement in the microwave range, an important prerequisite for reliable quantum communication.
Wiretapping-Proof Protocol Using Entanglement
The physicists’ current work brings them one step closer to the actual application: "Quantum Remote State Preparation," as they call their communication protocol. A quantum state can be set at a remote location without sending anything directly.
The concept can be visualized as follows: Two people, let's call them Alice and Bob, are in two different places. While a bit is the smallest piece of information in classical informatics, in quantum communication it is a quantum state.
Now, if Alice wants to send Bob a piece of information, both are given part of an entangled quantum mechanical state. Alice then does a measurement on her part of the state and transmits the result to Bob via classical means. Bob, in turn, performs a result-dependent operation on his part of the entangled state, thereby obtaining the quantum state that Alice wants to communicate to him.
The classically transmitted measurement result is of no use to any third party since they will not have the entangled state. This makes communications via this protocol absolutely immune to wiretapping.
Information Transmission Using Squeezed Waves
The researchers use a so-called squeezed microwave state as the quantum state. This is a special manifestation of an electromagnetic wave that can only be explained with quantum mechanics.
Here, a wave’s vacuum fluctuations are suppressed in one plane and amplified in the plane perpendicular to the first. Two such squeezed states can be used to produce an entangled state. The physicists developed this technique and other important details, such as superconducting quantum circuits, at the Walther Meißner Institute in Garching.
Seven-Meter Cooled Quantum Cable
The new concept could trigger a revolutionary development. "The experimental implementation of secure quantum communication in the microwave domain is an important step towards distributed quantum computing," says Frank Deppe, WMI coordinator of the European flagship project Quantum Microwave Communication and Sensing (QMiCS).
The TUM physicists also believe that significantly longer distances are possible between quantum computers. Here, one challenge will be to develop and measure several meters of cooled quantum cables. "In the context of QMiCS, we are already working on extending the distance to seven meters," says Gross. "This puts networking of superconducting quantum computers within reach."
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
IMAPS & IPC to Host Onshoring Workshop
04/16/2024 | IPCThe International Microelectronics Assembly and Packaging Society (IMAPS) and IPC will host an Onshoring Workshop to discuss ongoing progress and forward-looking strategies to drive the Onshoring Advanced Packaging and Assembly, April 29 – May 1, 2024, in Arlington, Virginia.
Tim’s Takeaways: The Art of Technical Instruction
04/04/2024 | Tim Haag -- Column: Tim's TakeawaysWhat does it take to become a PCB design instructor and be successful? This question is especially relevant in the rapidly changing landscape of printed circuit board design and layout. Our industry, like many others, is dealing with a lot of change. Turnover is chief among those changes as newcomers step into the positions left open by those retiring. There is the constant escalation of technology that triggers continual enhancements of standards and processes that designers must keep up with. It is evident that our industry needs good technical instructors to carry this load.
One World, One Industry: Sustainability Challenges—A Collaborative Approach
04/04/2024 | John Mitchell -- Column: One World, One IndustryMy personal belief is that changes to the electronics industry due to sustainability will be the most far-reaching in the industry’s history. This is not about if sustainability will impact us, but about when and if my organization will be left behind. We need to accelerate work that promotes sustainability and aims to achieve the ambitious sustainability goals set before us. The “we” includes all of us as individuals, but also as valued members of the global electronics manufacturing community. This diverse community can together address our greatest sustainability challenges.