Matrix Offering a Lamination Assist System for Flexible Circuit Lamination
July 17, 2020 | Matrix ElectronicsEstimated reading time: 1 minute
Matrix Electronics is promoting EuroPads® Press Pads and EuroForm® Conformal Release film as a system package for lamination of Flexible Printed Circuit Boards. Designed and offered as part of the new EuroAssist Product Line, EuroPads® and EuroForm® are exceptional alternatives to the many confusing and expensive competitive options currently available. When used together they maximize production yields, quality, and cost savings.
- EUROPADS® are Printed Circuit Board Lamination Press Pads, manufactured to offer pressure equalization and heat lagging benefits. EuroPads® proprietary composition offers consistent performance for PCB Lamination optimization. They possess excellent large-scale uniform pressure equalization, that compensates the inefficiencies created by contact between Press Platens and Tooling Plates.
- EUROFORM® conformal release film, when included as the second part of the system, provides a hydraulic seal around the flexible circuit, creating discreet contact of the film to the circuit board. This enhances the process of resin flow and fill characteristics. When used with EuroPads® in the Flex PCB manufacturing process, EuroForm® balances height differences during the lamination process while providing consistent pressure distribution across the surface of the circuit topography. Examples of applications are:
-
- Laminating Cover-Layers to control-adhesive squeeze out
- Manufacturing Multi-Layer Flexible Circuits with varying bond plies
- Manufacturing Rigid-Flex PCB’s with low-flow prepreg, to prevent air entrapment and minimize voids.
“It’s exciting to have these two flagship components in our Lamination Assist family of products. To date, positive customer trials and market acceptance through qualification confirms the positive benefits of EuroPads® and EuroForm®. Our system brings tangible results,” states Peter Decaneas, Product Manager for Lamination Assist Products at Matrix. “I enjoy working directly with customers sharing the many experiences I am privileged to have seen in my 35 years of direct involvement with Lamination Assist in both Flexible and Rigid Multilayer Laminations worldwide by offering these two new products,” adds Mr. Decaneas.
Suggested Items
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.