Arlon EMD Introduces 84HP Prepreg to Compliment the 85HP Laminate System


Reading time ( words)

Arlon Electronic Materials introduces 84HP high-performance 250⁰C Tg temperature polyimide resin prepreg.  Arlon developed 84HP as a prepreg bonding companion to Arlon’s 85HP filled pure polyimide resin laminate system.  84HP is designed for use in filling etched areas in polyimide multilayers that contain thick copper metal cores.

A proprietary filler is dispersed within the 84HP and 85HP polyimide resin which serves to reduce shrinkage and inhibit crack formation during lamination and through-hole mechanical drilling processes.  This unique formulation has proven benefits such as improved drilling over conventional polyimide resin systems, predictable dimensional stability, and reduction in gouging and glass wicking during hole formation. 

Additional benefits include X-Y expansion rates very close to copper (16-18 ppm/⁰C), and very low Z-axis of <1%, the lowest Z-axis expansion of any polyimide in the industry.  Arlon’s 84HP is manufactured on 50” wide 106 E-glass matching the grain direction of 85HP.  84HP meets the requirements of IPC-4101/40 and IPC-4101/41.

Dave Nelson, director of business development for Arlon, stated: “The performance requirements of IPC-6012DS, an addendum to IPC-6012D, specify that printed circuits boards manufactured to this added level of reliability must survive vibration, ground testing and thermal cycling environments of space and military avionics. These requirements can be achieved by using 84HP as the bonding layers for the 85HP etched laminates.  Additional benefits using this combination are 2X thermal conductivity versus conventional polyimide systems for improved component longevity and lower component junction temperatures.”

Applications for Arlon’s 85HP and 84HP include high layer count MLB’s incorporating several sequential lamination operations, thick copper MLB’s, high power copper internal planes, deep space electronics, down-hole oil and gas drill equipment, engine control modules, rocket motor controls, and avionic electronics.

About Arlon: Arlon EMD is a US manufacturer of specialty materials.  Arlon has supplied materials for the North American, UK, European, Israeli and Asian markets for more than 35 years from their manufacturing location in Rancho Cucamonga, California.

For additional information, please visit our website at www.arlonemd.com.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/30/2021 | Nolan Johnson, I-Connect007
This week’s biggest news came in the form of industry briefings—there were a lot of them and the news was universally positive. The news you need to read for this week includes three reports from IPC detailing: the strength and risks in the global economic recovery; a strong EMS book-to-bill ratio; and strong North American PCB sales. Zeroing in on a single company, Apple reported a significant jump in revenue.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/23/2021 | Andy Shaughnessy, I-Connect007
This week, we bring you a wide swath of news, columns, and articles from the past week. Altium announced a new cloud platform that connects design stakeholders with users of its Altium 365 environment. Cadence Design Systems has acquired a company that develops computational fluid dynamics technology to help expand its system analysis offerings.

A Show Full of Opportunities

04/16/2021 | Tara Dunn, Averatek
Looking back to my notes from IPC APEX 2020, I noticed one of my comments: There were so many interesting sessions that I often found myself in the position of choosing between several that I wanted to attend in the same timeslot. This year was not any different in that regard. I am purposely glossing over the fact that I, like many of my friends, missed the camaraderie and opportunity to catch up in person while attending these technical sessions, and I look forward to being able to do that next year.



Copyright © 2021 I-Connect007. All rights reserved.