-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
AT&S Uses 'Smart' Quality Controls in PCB Production
April 21, 2021 | AT&SEstimated reading time: 3 minutes
Printed circuit boards are the nervous system of all electronic devices. Whether for mobile devices or in the automotive, industrial and medical sectors. The areas of application are diverse, as is the production. Around 150 complex work steps are required for a single circuit board before it is ready for use.
Quality assurance at the highest level
“The high quality of our products is a matter of course at AT&S. Photos of the circuit boards are taken automatically during the manufacturing process and these are then run through image analysis software. Sometimes it happens that circuit boards are mistakenly recognized as “faulty”. Unfortunately for no reason we can understand. That cost us additional time and resources,” says Ulrike Klein, Head of the Data & Analytics department at AT&S.
The Know-Center developed an AI algorithm for the leading manufacturer of high-end printed circuit boards AT&S. This not only correctly recognizes the images of the circuit boards, but also provides an explanation of why a circuit board has been recognized as defective or intact. As a result, AT&S now has a transparent AI system at its disposal, which, after an intensive test phase, should deliver comprehensible and explainable results in the near future.
Technicians and artificial intelligence agree
“It was our aim to precisely identify the faulty circuit boards and to make the results comprehensible. We are pleased that we were not only able to implement the project successfully, but that our results also agree with the statements of the AT&S technicians”, says Dr. Andreas Trügler, Head of the DDAI Module at the Know-Center. “First our algorithm had to understand which circuit boards were faulty and why. To do this, the team trained a neural network and fed it with image data from correct and faulty circuit boards. Using methods from the “Explainable AI” research field, we were also able to provide an explanation of why and where a circuit board was identified as defective.”
Intelligent production environment using AI
Industry 4.0 or the so-called “Smart Factory” is no longer a dream of the future. The use of smart and intelligent machines and applications ensures companies significant advantages in times of increasing competitive pressure.
More than ever, AI is the driving technology for innovative products and services in the age of digitalization. The manufacturing industry is grappling intensively with this, especially in the area of automation. Stefanie Lindstaedt, Managing Director of the Know-Center explains: “AI enables quality assurance at the highest level and saves companies costs and resources. Automated image recognition and analysis, which is finding its way into many industries, still show quality gaps. Another obstacle to firmly anchoring AI in companies is trust in these technologies. We are very pleased that we succeeded in overcoming both barriers in this project”.
AT&S is one of the industrial partners in the COMET-Modul DDAI. The module, led by the Know-Center, is funded by the FFG and aims to develop safe, verifiable and explainable AI that also protects privacy. This is intended to make a significant contribution to acceptance and trust in AI. In the future, the plan is to work with AT&S and other industrial partners in this module to advance further projects in the direction of “Trustworthy AI”.
About the know-center
The Know-Center is one of the leading European research centers for data-driven business and AI. Well-known companies have been supported in using data as a success factor for their company since 2001. For data analysis, the Know-Center relies on established Big Data and High Performance Computing (HPC) infrastructures. As an integral part of the European research landscape, the center is very successful in handling numerous projects and contract research at EU and national level. The K1 competence center funded by COMET is also the leading training facility for data scientists in Austria and offers a range of Al training courses and advice for companies. The majority shareholder is the Graz University of Technology, an important sponsor of domestic AI research, whose institutes handle numerous projects together with the Know-Center. In 2020, the Know-Center was the only Austrian center to receive the EU’s iSpace Gold Award, which was only given nine times in the entire EU.
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
SMT Prospects and Perspectives: AI Opportunities, Challenges, and Possibilities, Part 1
04/17/2024 | Dr. Jennie Hwang -- Column: SMT Perspectives and ProspectsIn this installment of my artificial intelligence (AI) series, I will touch on the key foundational technologies that propel and drive the development and deployment of AI, with special consideration of electronics packaging and assembly.
Argonne, RIKEN Sign a Memorandum of Understanding in Support of AI for Science
04/16/2024 | BUSINESS WIRELeaders in high performance computing in the U.S. and Japan have signed a memorandum of understanding (MOU) establishing a cooperative relationship in support of artificial intelligence (AI) computing projects.